Frelander 2. Manual — part 20
DTC
Description
Possible Cause
Action
tank unit circuit (Fuel eject sensor) for short to ground.
Using the manufacturer approved diagnostic system
check and install latest relevant level of software to
the central junction box and the instrument panel
cluster. If the level of software is correct carry out a
battery reset
P1674-00 Control Module
Software Corrupted
A software assertion failed
within the module
Load the latest relevant level of software using the
manufacturer approved diagnostic system
U0001-00 High Speed CAN
Communication Bus
Bus Off
Carry out the associated network test for this DTC
using the manufacturer approved diagnostic system
U0010-00 Medium Speed CAN
Communication Bus
Bus Off
Carry out the associated network test for this DTC
using the manufacturer approved diagnostic system
U0100-00 Lost Communication
With ECM/PCM 'A'
Lost communication with
ECM
Carry out the associated network test for this DTC
using the manufacturer approved diagnostic system
U0101-00 Lost Communication
with TCM
Lost communication with
TCM
Carry out the associated network test for this DTC
using the manufacturer approved diagnostic system
U0104-00 Lost Communication
With Speed Control
Module
Lost communication with
speed control module
Carry out the associated network test for this DTC
using the manufacturer approved diagnostic system
U0126-00 Lost Communication
With Steering Angle
Sensor Module
Lost communication with
steering angle sensor
Carry out the associated network test for this DTC
using the manufacturer approved diagnostic system
U0129-00 Lost Communication
With Brake System
Control Module
Lost communication with
ABS module
Carry out the associated network test for this DTC
using the manufacturer approved diagnostic system
U0135-00 Lost Communication
With Differential
Control Module -
Front
Lost communication with
differential control module
Carry out the associated network test for this DTC
using the manufacturer approved diagnostic system
U0155-00 Lost Communication
With Instrument
Panel Cluster (IPC)
Control Module
Lost communication with
instrument cluster
Carry out the associated network test for this DTC
using the manufacturer approved diagnostic system
U0156-00 Lost Communication
With Information
Center "A"
Lost communication with
information center
Carry out the associated network test for this DTC
using the manufacturer approved diagnostic system
U0159-00 Lost Communication
With Parking Assist
Control Module "A"
Lost communication with
parking aid module
Carry out the associated network test for this DTC
using the manufacturer approved diagnostic system
U0164-00 Lost Communication
With HVAC Control
Module
Lost communication with
climate control module
Carry out the associated network test for this DTC
using the manufacturer approved diagnostic system
U0166-00 Lost Communication
With Auxiliary Heater
Control Module
Lost communication with
auxiliary heater control
module
Carry out the associated network test for this DTC
using the manufacturer approved diagnostic system
U0181-00 Lost Communication
With Headlamp
Levelling Control
Module
Lost communication with
headlamp Levelling control
module
Carry out the associated network test for this DTC
using the manufacturer approved diagnostic system
U0199-00 Lost Communication
With "Door Control
Module A"
Lost communication with
Driver Door Module (DDM)
Carry out the associated network test for this DTC
using the manufacturer approved diagnostic system
U0200-00 Lost Communication
With "Door Control
Module B"
Lost communication with
Passenger Door Module
(PDM)
Carry out the associated network test for this DTC
using the manufacturer approved diagnostic system
U0208-00 Lost Communication
With "Seat Control
Module A"
Lost communication with
Passenger Seat Module
(PSM)
Carry out the associated network test for this DTC
using the manufacturer approved diagnostic system
U0214-00 Lost Communication
With Remote Function
Actuation
Lost communication with
Remote Keyless Entry
module
Carry out the associated network test for this DTC
using the manufacturer approved diagnostic system
U0231-00 Lost Communication
With Rain Sensing
Module
Lost communication with
rain sensing module
Carry out the associated network test for this DTC
using the manufacturer approved diagnostic system
U0236-00 Lost Communication
With Column Lock
Module
Lost communication with
steering column lock
module
Carry out the associated network test for this DTC
using the manufacturer approved diagnostic system
U0252-00 Lost Communication
With Lighting Control
Module - Rear 'B'
Lost communication with
trailer module
Carry out the associated network test for this DTC
using the manufacturer approved diagnostic system
U0301-00 Software
Incompatibility with
ECM/PCM
ECM disconnected
Incorrect ECM installed
Check electrical connections to ECM. Check correct ECM
is installed
DTC
Description
Possible Cause
Action
U0401-00 Invalid Data Received
From ECM/PCM
Invalid data received from
ECM
Check ECM for DTCs and refer to DTC Index
U0405-00 Invalid Data Received
From Cruise Control
Module
Invalid data received from
speed control module
Check speed control module for DTCs and refer to DTC
Index
U0515-00 Invalid data received
from remote function
actuation
Invalid data received from
keyless entry module
Check keyless entry module for DTCs and refer to DTC
Index. Carry out the pinpoint tests associated to this
DTC using the manufacturer approved diagnostic
system
U2005-62 Vehicle Speed -
Signal compare failure
Vehicle Speed - Signal
compare failure
Check ABS for DTCs and refer to DTC Index
U2010-11 Switch Illumination -
circuit short to ground
Switch illumination circuit -
short to ground
Refer to electrical circuit diagrams and check switch
illumination circuit for short to ground
U2010-15 Switch Illumination -
circuit short to power
or open
Switch illumination circuit -
short to power, open
circuit
Refer to electrical circuit diagrams and check switch
illumination circuit for short to power, open circuit
U2017-41 Control Module
Software #2 - general
checksum failure
Signal configuration
checksum not correct
Install latest relevant level of software using the
manufacturer approved diagnostic system
U2018-41 Control Module
Software #3 - general
checksum failure
Local configuration
checksum not correct
Install latest relevant level of software using the
manufacturer approved diagnostic system
U2101-00 Control Module
Configuration
Incompatible
Each function reports if a
car configuration
parameter has a value that
is unknown
Check and reload Car Configuration File
U3000-51 Control Module - not
programmed
Car config or Local config
or Signal config is not
loaded
Install latest relevant level of software using the
manufacturer approved diagnostic system
U3003-16 Battery Voltage
Circuit voltage below
threshold
Carry out the pinpoint tests associated to this DTC
using the manufacturer approved diagnostic system
U3003-17 Battery Voltage
Circuit voltage above
threshold
Carry out the pinpoint tests associated to this DTC
using the manufacturer approved diagnostic system
General Information - Diagnostic Trouble Code (DTC) IndexDTC: Cellular
Telephone Control Module (Bluetooth Telephone Module) (BPM)
Description and Operation
• NOTE: If a control module or component is suspect and the vehicle remains under manufacturer warranty, refer to the
Warranty Policy and Procedures manual (section B1.2), or determine if any prior approval program is in operation, before
the replacement of a component.
• NOTE: Generic scan tools may not read the codes listed, or may read only 5-digit codes. Match the 5 digits from the scan
tool to the first 5 digits of the 7-digit code listed to identify the fault (the last 2 digits give extra information read by the
manufacturer-approved diagnostic system).
• NOTE: When performing voltage or resistance tests, always use a digital multimeter (DMM) accurate to three decimal
places, and with an up-to-date calibration certificate. W hen testing resistance always take the resistance of the DMM
leads into account.
• NOTE: Check and rectify basic faults before beginning diagnostic routines involving pinpoint tests.
• NOTE: Inspect connectors for signs of water ingress, and pins for damage and/or corrosion.
• NOTE: If DTCs are recorded and, after performing the pinpoint tests, a fault is not present, an intermittent concern may
be the cause. Always check for loose connections and corroded terminals.
Description And Operation
For a detailed description of the cellular phone system, refer to the relevant Description and Operation section in the
workshop manual.
For additional information, refer to:
Cellular Phone
(415-01 Information and Entertainment System, Description and
Operation).
Bluetooth Module
DTC
Description
Possible Cause
Action
B1A5613 Bluetooth
antenna
Bluetooth antenna circuit - open
circuit
Refer to electrical circuit diagrams and check bluetooth antenna
circuit for open circuit
B1D7984 Microphone
input
Signal amplitude below minimum Carry out MOST system checks using manufacturer approved
diagnostic system
U1A0088 Private Bus
circuit
BT chipset communications
failure
Install a new bluetooth module.
For additional information, refer to:
Bluetooth Module
(415-01
Information and Entertainment System, Removal and
Installation).
U210000 Control
module
Initial configuration incomplete
Re-configure the CJB using the manufacturer approved diagnostic
system. If DTC remains carry out CAN Network integrity tests
using the manufacturer approved diagnostic system
U210100 Control
module
Configuration incompatible
Check/up-date Car Configuration File using manufacturer approved
diagnostic system
U300044 Control
module
Data memory failure
Install a new bluetooth module.
For additional information, refer to:
Bluetooth Module
(415-01
Information and Entertainment System, Removal and
Installation).
U300045 Control
module
Program memory failure
Install a new bluetooth module.
For additional information, refer to:
Bluetooth Module
(415-01
Information and Entertainment System, Removal and
Installation).
U300055 Control
module
Incorrect Car Configuration File
data received
Check/up-date Car Configuration File using manufacturer approved
diagnostic system
U300087 Control
module
Missing message
Check CJB for DTCs and refer to DTC Index.
For additional information, refer to:
Communications Network
(418-00 Module Communications Network, Diagnosis and Testing).
Check information and entertainment module for Car Configuration
File and MOST network DTCs and refer to relevant DTC Index.
Carry out MOST/CAN network tests using the manufacturer
approved diagnostic system
U300098 Control
module
Over temperature
Check for additional DTCs and refer to DTC Index. Check/monitor
system for re-occurrence
U300362 Battery
voltage
Mis-match in battery voltage, of
2 volts or more, between
bluetooth module and CJB
Carry out pinpoint tests associated with this DTC using the
manufacturer approved diagnostic system
General Information - Diagnostic Trouble Code (DTC) IndexDTC: Digital
Audio Broadcast Module (DABM)
Description and Operation
• NOTE: If a control module or component is suspect and the vehicle remains under manufacturer warranty, refer to the
Warranty Policy and Procedures manual (section B1.2), or determine if any prior approval program is in operation, before
the replacement of a component.
• NOTE: Generic scan tools may not read the codes listed, or may read only 5-digit codes. Match the 5 digits from the scan
tool to the first 5 digits of the 7-digit code listed to identify the fault (the last 2 digits give extra information read by the
manufacturer-approved diagnostic system).
• NOTE: When performing voltage or resistance tests, always use a digital multimeter (DMM) accurate to three decimal
places, and with an up-to-date calibration certificate. W hen testing resistance always take the resistance of the DMM
leads into account.
• NOTE: Check and rectify basic faults before beginning diagnostic routines involving pinpoint tests.
• NOTE: Inspect connectors for signs of water ingress, and pins for damage and/or corrosion.
• NOTE: If DTCs are recorded and, after performing the pinpoint tests, a fault is not present, an intermittent concern may
be the cause. Always check for loose connections and corroded terminals.
Description And Operation
For a detailed description of the digital audio broadcast system, refer to the relevant Description and Operation section in
the workshop manual.
For additional information, refer to:
Audio System
(415-01 Information and Entertainment System, Description and
Operation).
Digital Audio Broadcast Module (DAB)
DTC
Description
Possible Cause
Action
B11A4-11 L-Band
antenna
DAB L-Band antenna circuit -
short to ground
Refer to electrical circuit diagrams and check DAB L-Band antenna
circuit for short to ground
B11A4-13 L-Band
antenna
DAB L-Band antenna circuit -
open circuit
Refer to electrical circuit diagrams and check DAB L-Band antenna
circuit for open circuit
B11A5-11 Band 3
antenna
DAB Band 3 antenna circuit -
short to ground
Refer to electrical circuit diagrams and check DAB Band 3 antenna
circuit for short to ground
B11A5-13 Band 3
antenna
DAB Band 3 antenna circuit -
open circuit
Refer to electrical circuit diagrams and check DAB Band 3 antenna
circuit for open circuit
U3000-04 Control
module
System internal failure
Install a new digital audio broadcast module.
For additional information, refer to:
Satellite Radio Tuner
(415-01
Information and Entertainment System, Removal and
Installation).
U3000-4A Control
module
Incorrect component installed
Install a new digital audio broadcast module or Re-configure the
digital audio broadcast module using the manufacturer approved
diagnostic system
U3000-55 Control
module
Incorrect Car Configuration File
data received
Check/up-date Car Configuration File using manufacturer approved
diagnostic system
U3000-87 Control
module
Missing message
Check CJB for DTCs and refer to DTC Index.
For additional information, refer to:
Communications Network
(418-00 Module Communications Network, Diagnosis and Testing).
Check information and entertainment module for Car Configuration
File and MOST network DTCs and refer to relevant DTC Index.
Carry out MOST/CAN network tests using the manufacturer
approved diagnostic system
U3000-98 Control
module
Component or system over
temperature
Check for additional DTCs and refer to relevant DTC Index.
Check/monitor system for re-occurrence
U3003-62 Battery
voltage
Mis-match in battery voltage, of
2 volts or more, between digital
broadcast module and CJB
Carry out pinpoint tests associated with this DTC using the
manufacturer approved diagnostic system
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст