Frelander 2. Manual — part 386
Exhaust System - TD4 2.2L Diesel - Exhaust System
Removal and Installation
Removal
WARNING: Observe due care when working near a hot exhaust system.
• NOTE: Removal steps in this procedure may contain installation details.
All vehicles
1.
WARNING: Do not work on or under a vehicle supported only
by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.
1.
Vehicles with petrol engine
Torque: 25 Nm
2.
Vehicles with diesel engine
Torque: 40 Nm
3.
All vehicles
4.
WARNING: This step requires the aid of
another technician.
4.
Vehicles with petrol engine
Remove and discard the gasket.
5.
All vehicles
6. NOTE: Do not disassemble further if the component is removed
for access only.
Remove the rubber mounts.
6.
Installation
To install, reverse the removal procedure.
1.
Exhaust System - TD4 2.2L Diesel - Diesel Particulate Filter (DPF)
Removal and Installation
Removal
WARNING: Observe due care when working near a hot exhaust system.
Raise the vehicle on a lift.
1.
Remove the engine undershield.
Refer to:
Engine Undershield
(501-02 Front End Body Panels,
Removal and Installation).
2.
Remove the exhaust system.
Refer to:
Exhaust System
(309-00A Exhaust System - I6 3.2L Petrol,
Removal and Installation).
3.
4. CAUTIONS:
Mark the components to aid installation.
Always plug any open connections to prevent
contamination.
4.
5.
6.
CAUTION: Discard the nuts.
6.
7.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст