Defender. Manual — part 114
6. NOTE: Cooling fan shroud removed for clarity.
Disconnect the thermostat to radiator top hose.
Release the clip.
7. NOTE: Cooling fan shroud removed for clarity.
Disconnect the thermostat to coolant pump inlet hose.
Release the clip.
8. NOTE: Cooling fan shroud removed for clarity.
Remove the thermostat.
Installation
1. To install, reverse the removal procedure.
Tighten to 3 Nm (2 lb.ft).
2. Tighten to 4 Nm (3 lb.ft).
2. Tighten to 4 Nm (3 lb.ft).
3. Connect the battery ground cable.
For additional information, refer to:
Battery Connect
(414-01
Battery, Mounting and Cables, General Procedures).
Fuel Charging and Controls - 2.4L Duratorq-TDCi HPCR (103kW/140PS) -
Puma -
Torque Specifications
Description
Nm
lb-ft
Fuel injector clamp bolt
A
—
High-pressure fuel supply line unions
Stage 1
5
4
Stage 2
35
26
Fuel pressure relief valve
A
—
Fuel pump high-pressure fuel supply line bracket bolts
10
7
Fuel pressure relief valve spigot
20
15
Fuel rail to cylinder head
Stage 1
8
16
Stage 2
23
17
Fuel pump bolts
23
17
Fuel pump drive gear bolts
33
24
Fuel pump drive gear nut
64
47
A = Refer to the procedure for the correct torque sequence
Fuel Charging and Controls - 2.4L Duratorq-TDCi HPCR (103kW/140PS) -
Puma - Fuel Charging and Controls
Description and Operation
COMPONENT LOCATION
Item
Part Number
Description
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст