Range Rover Classic. Manual — part 190
86
ELECTRICAL
48
REPAIR
INSTRUMENT BINNACLE COMPONENTS
1. Instrument cowl
2. Face plate
3. Fuel gauge
4. Speedometer
5. Instrument binnacle
6. Screw - securing circuit board
7. Circuit board
8. Tachometer
9. Temperature gauge
10. Illumination board
11. Screw securing illumination board
12. Circuit board - instrument illumination
13. Instrument illumination bulb holder and bulb
14. Speedometer trip reset button sleeve
15. Screw - cowl and binnacle
ELECTRICAL
49
REPAIR
PRINTED CIRCUIT AND WARNING LIGHTS
1. Panel illumination bulbs
2. Transmission oil temperature warning lamp bulb
3. Hazard warning lamp bulb
4. Check engine warning lamp bulb
5. Handbrake/brake fluid warning lamp bulb
6. ABS warning lamp bulb
7. Headlamp main beam warning lamp bulb
8. Trailer direction warning lamp bulb
9. Direction indicator warning lamp bulb
10. Air suspension warning lamp bulb
11. Ignition/no charge warning lamp bulb
12. Seat belt warning lamp bulb
13. Not used
14. Traction control warning lamp bulb
15. Diesel heater plug warning lamp bulb (if fitted)
16. Main printed circuit
86
ELECTRICAL
50
REPAIR
INSTRUMENT COWL AND ILLUMINATION BOARD
Service repair no - 88.20.06 - Instrument cowl
Service repair no - 88.20.22 - Illumination board
Remove
1. Remove binnacle.
See Instrument Binnacle
Instrument cowl
2. Remove bulb holder from binnacle.
3. Release 4 clips securing top of cowl to binnacle.
4. Release 3 clips securing bottom of cowl to
binnacle, remove cowl.
Illumination board
5. Release bulb holder wires from clip.
6. Remove screw securing illumination board to
cowl, remove board.
Refit
Illumination board
7. Position illumination board to cowl, fit and tighten
screw.
8. Secure bulb holder wires in clip.
Instrument cowl
9. Ensure instrument face plate is correctly
positioned.
10. Position cowl to binnacle ensuring speedometer
trip passes through hole in cowl.
11. Secure cowl retaining clips.
12. Fit bulb holder in binnacle.
13. Fit binnacle.
See Instrument Binnacle
ELECTRICAL
51
REPAIR
SPEEDOMETER
Service repair no - 88.30.01
Remove
1. Remove instrument cowl.
See Instrument
Cowl and Illumination Board
2. Remove speedometer trip reset button sleeve.
3. Remove instrument face plate.
4. Remove 4 screws securing speedometer,
remove speedometer.
Refit
5. Reverse removal procedure.
TACHOMETER
Service repair no - 88.30.21
Remove
1. Remove circuit board.
See Circuit Board
2. Remove instrument cowl.
See Instrument
Cowl and Illumination Board
3. Remove speedometer trip reset button sleeve.
4. Remove instrument face plate.
5. Remove 3 screws securing tachometer to
binnacle, remove tachometer.
Refit
6. Reverse removal procedure.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст