Jeep Grand Cherokee WK. Manual — part 1251
11. Verify that the fuel filler tube grommet is in place
and lube the grommet to aid installation of the
filler tube.
12. Install the filler tube through the grommet.
13. Install the bolt (1) supporting the fuel filler tube (2)
and tighten to 14 N·m (10 ft. lbs.).
13 - 20
FRAME & BUMPERS
WK
14. Connect the fuel filler hose (3) to the fuel tank
and install the clamp (4).
15. Connect the fuel line (1).
16. Connect the vapor canister line (2).
17. Connect the trailer wiring electrical connector (1).
18. Position the left wire harness through the cradle
and secure the harness hangers.
WK
FRAME & BUMPERS
13 - 21
19. Install the vapor canister (1) and install the lower
canister nut (2).
20. Tighten the nuts to 24 N·m (17 ft. lbs.).
21. Connect the vapor canister hoses.
22. Connect the vapor canister electrical connector.
13 - 22
FRAME & BUMPERS
WK
23. Position the right wire harness through the cradle
and secure the harness hangers.
24. Connect the tire pressure monitor sensor, if
equipped.
25. Install the tail lamps. (Refer to 8 - ELECTRICAL/
LAMPS/LIGHTING - EXTERIOR/TAIL LAMP -
INSTALLATION)
26. Install the fascia. (Refer to 13 - FRAME &
BUMPERS/BUMPERS/FASCIA-REAR - INSTAL-
LATION)
27. Install the spare wheel.
WK
FRAME & BUMPERS
13 - 23
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст