Jeep Grand Cherokee WK. Manual — part 71
INSTALLER C-4308
INSTALLER C-4340
REMOVER C-4345
INSTALLER D-130
ADAPTER PLUG SP-3289
PULLER 6444
INSTALLER 6448A
PINION GAUGE SET 6774
3 - 182
REAR AXLE - C213R
WK
PINION BLOCK 8540
ARBOR DISCS 8541A
JAWS 9639
WK
REAR AXLE - C213R
3 - 183
DIFFERENTIAL COVER
REMOVAL
1. With vehicle in neutral, position on hoist.
2. Remove differential cover (1) fill plug (2).
3. Remove differential cover (1) and drain fluid.
INSTALLATION
1. Apply a 6.35mm (1/4 in.) bead of Mopar
T
Gear
Sealant RTV Silicone Rubber Adhesive MS-GF44D
or equivalent to the cover.
CAUTION: If housing cover is not installed within
3 to 5 minutes, the cover must be cleaned and
new RTV applied. Failure to follow these instruc-
tions will result in a leak.
2. Install cover and tighten cover (1) bolts in a criss-
cross pattern to 41 N·m (30 ft. lbs.).
3. Fill differential and install fill plug.
3 - 184
REAR AXLE - C213R
WK
AXLE SHAFTS
REMOVAL
1. With vehicle in netural, position on hoist.
2. Remove calipers and rotors.
3. Tap axle end plug (1) loose from the axle flange (2)
with a hammer and punch. Pull plug (1) out of axle
flange (2).
4. Remove speed sensors (2) from axle tube (1)
flange.
WK
REAR AXLE - C213R
3 - 185
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст