Jeep Grand Cherokee WK. Manual — part 47
INSTALLATION
1. Install axle tube bushing with Press C-4212F (1),
Installer 9511 (2) and Receiver 9536-2 (3).
2. Install pinion nose bushing with Press C-4212F (1),
Installer 9536-2 (2) and Receiver 9511(3).
3. Install new pinion seal, pinion flange and new pin-
ion nut.
3 - 86
FRONT AXLE - C200F
WK
DIFFERENTIAL
REMOVAL
1. Remove half shafts and axle shaft.
2. Remove differential cover.
3. Remove three axle tube (1) mounting bolts (2) from
differential housing (3).
4. Tap axle tube (1) and pull tube off differential hous-
ing flange (2).
5. Remove half shaft differential housing seal with
seal pick.
WK
FRONT AXLE - C200F
3 - 87
6. Bolt spreader Adapters 9669 (1) to differential
housing (2).
7. Install Spreader W-129-B (1) on adapters (2).
8. Spread case .3mm (0.011 in.).
3 - 88
FRONT AXLE - C200F
WK
9. Remove select snap-rings (1) from differential
housing bearing bores (2).
10. Measure select snap-rings (2) and mark the size
and location of the snap-rings.
WK
FRONT AXLE - C200F
3 - 89
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст