Jeep Grand Cherokee WK. Manual — part 61
REMOVAL
1. Remove half shafts and axle shaft.
2. Remove differential cover.
3. Remove three axle tube (1) mounting bolts (2) from
differential housing (3).
4. Tap axle tube (1) and pull tube off differential hous-
ing (3) flange.
5. Bolt spreader Adapters 9669 to differential housing
(2).
6. Install Spreader W-129-B on adapters.
7. Spread case .3mm (0.011 in.).
8. Remove differential housing seal with seal pick.
9. Remove differential housing (1) snap ring (2).
3 - 142
FRONT AXLE - C200FE
WK
10. Measure (1) snap ring (2) and mark ring for
location.
11. Remove solenoid valve connector (1) from ELSD
solenoid valve (2).
WK
FRONT AXLE - C200FE
3 - 143
12. Remove differential bearing cap bolts (1) and cap
(2).
13. Remove axle tube side differential housing (1)
snap ring (2).
3 - 144
FRONT AXLE - C200FE
WK
14. Measure (1) snap ring (2) and mark ring for
location.
15. Slid differential assembly (1) to the right and tilt
ELSD pump (2) and differential out of the housing.
WK
FRONT AXLE - C200FE
3 - 145
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст