Jeep Grand Cherokee WK. Manual — part 1213

8. Install drive plate to torque converter bolts (1).

9. Install the structural dust cover (1).

9 - 1448

ENGINE - 5.7L SERVICE INFORMATION

WK

10. Install the starter (1) and connect the starter wires

(Refer to 8 - ELECTRICAL/STARTING/STARTER
MOTOR - INSTALLATION).

11. Install exhaust pipe to manifold.

12. Lower the vehicle.

13. Remove engine lift fixture (2), special tool # 8984

and 8984–UPD.

WK

ENGINE - 5.7L SERVICE INFORMATION

9 - 1449

14. Connect the fuel supply line (Refer to 14 - FUEL

SYSTEM/FUEL

DELIVERY/QUICK

CONNECT

FITTING - STANDARD PROCEDURE).

15. Reinstall the power steering pump.

16. Connect the heater hoses (1).

9 - 1450

ENGINE - 5.7L SERVICE INFORMATION

WK

17. Reconnect the ground wires to the rear of each

cylinder head.

18. Install the intake manifold. (Refer to 9 - ENGINE/

MANIFOLDS/INTAKE MANIFOLD - INSTALLA-
TION)

19. Install the generator (2), and wire connections

(Refer to 8 - ELECTRICAL/CHARGING/GENERA-
TOR - INSTALLATION).

20. Install a/c compressor (3) (Refer to 24 - HEATING

& AIR

CONDITIONING/PLUMBING/A/C

COM-

PRESSOR - INSTALLATION).

WK

ENGINE - 5.7L SERVICE INFORMATION

9 - 1451