Jeep Grand Cherokee WK. Manual — part 41
9. Remove outer tie rod end nuts and separate tie
rods (3) from knuckles (4) with Remover 8677 (5).
10. Remove upper ball joint nuts (4) and separate ball
joints (2) from knuckles (3) with Remover 8677.
3 - 62
FRONT AXLE - C200F
WK
11. Remove lower shock clevis (3) nuts bolts (2) from
lower control arm.
12. Lean the knuckles out and push half shafts out of
the hub/bearings.
13. Pry half shafts off the axles.
14. Remove differential vent hose.
15. Support axle with a lift/jack.
16. Remove bolt (1) from differential bushing (2).
WK
FRONT AXLE - C200F
3 - 63
17. Remove bolt (1) from axle tube bushing (2).
18. Remove bolts (1) from differential cover bracket
(2) bushing.
19. Lower axle and from vehicle.
3 - 64
FRONT AXLE - C200F
WK
INSTALLATION
1. Raise axle to vehicle.
2. Install differential cover axle bracket (2) bushing
bolts (1) and tighten bolts to 47 N·m (35 ft. lbs.)
3. Install axle tube bushing bolt and nut. Tighten nut
to 95 N·m (70 ft. lbs.)
WK
FRONT AXLE - C200F
3 - 65
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст