Jeep Grand Cherokee WK. Manual — part 1547
16. Remove the screws (2) holding the chain guide
rails (1) to the front housing.
17. Remove the drive chain guide (1) from the trans-
fer case.
18. Remove the differential snap-ring (1).
21 - 998
TRANSFER CASE - NV140 - SERVICE INFORMATION
WK
19. Remove the differential assembly (1) from the
mainshaft (2).
20. Remove the mode hub (2) and mode hub retainer
from the differential assembly (1).
21. Remove the mode hub retainer (1) from the mode
hub (2).
WK
TRANSFER CASE - NV140 - SERVICE INFORMATION
21 - 999
22. Remove the retaining ring (2) from the front out-
put shaft (1).
23. Remove the front output shaft (2) from the front
housing (1) and the front output shaft front bear-
ing.
24. Remove the front output shaft seal with a suitable
pry tool or a screw mounted in a slide hammer.
25. Remove the input shaft seal with a suitable pry
tool or a screw mounted in a slide hammer.
26. Remove the input gear (2) from the front housing
(1).
21 - 1000
TRANSFER CASE - NV140 - SERVICE INFORMATION
WK
ASSEMBLY
1. Remove the input shaft bearing from the front
housing (3) with Handle C-4171 (1) and Installer
8693A (2).
.
2. Install the input gear bearing into the front housing
(3) using Installer 8152 (2), inverted, and Handle
C-4171 (1).
3. Using Installer 7829A (2) and Handle C-4171 (1),
remove front output shaft bearing from the front
housing (3).
WK
TRANSFER CASE - NV140 - SERVICE INFORMATION
21 - 1001
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст