Jeep Grand Cherokee WK. Manual — part 51
8. Remove spacer (1) from pinion shaft (2).
9. Remove rear pinion bearing from pinion shaft (1)
with
Puller
C-293-PA
(2)
and
four
Adapters
C-293-37.
3 - 102
FRONT AXLE - C200F
WK
10. Remove front pinion bearing cup (1) with Handle
C-4171 (2) and Remover D-103 (3).
11. Remove rear pinion bearing cup (1) with Remover
9884 (2) and Handle C-4171.
WK
FRONT AXLE - C200F
3 - 103
12. Remove pinion height select shim (1) from rear
pinion bearing cup bore (2).
INSTALLATION
1. Install left hand thread ring gear Installer Bolts
9533 (1) through differential (2) and into ring gear
(3). Tighten nuts on installer bolts evenly and draw
ring gear onto differential case.
2. Remove installer bolts and install new left hand
thread ring gear bolts and tighten to 102 N·m (75
ft. lbs.).
3 - 104
FRONT AXLE - C200F
WK
3. Install front pinion bearing cup into housing, with
Installer D-129 (1) and Handle C-4171 (2).
4. Install pinion depth shim (1) in rear pinion bearing
cup bore (2).
WK
FRONT AXLE - C200F
3 - 105
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст