Jeep Grand Cherokee WK. Manual — part 78
7. Remove pinion seal with a pry tool or slide-hammer
mounted screw.
8. Remove oil slinger if equipped and front pinion
bearing.
9. Remove front pinion bearing cup with Remover
C-4345 (1) and Handle C-4171 (2).
10. Remove rear bearing cup from housing with
Remover C-4307 (1) and Handle C-4171 (2).
3 - 210
REAR AXLE - C213R
WK
11. Remove collapsible preload spacer (1) from pinion
gear.
12. Remove rear bearing from pinion with Puller/
Press C-293-PA (1) and Adapters C-293-47 (3).
WK
REAR AXLE - C213R
3 - 211
13. Remove depth shims (1) from pinion gear (2) and
record shim thickness.
INSTALLATION
NOTE: Ring and pinion gears are a matched set.
Do not replace one gear without replacing the
other matching gear. If ring and pinion gears or
bearings are replaced, Refer to Adjustments for
Pinion Gear Depth Setting.
1. Apply Mopar Door Ease or stick lubricant to outside
surface of pinion bearing cups.
2. Install rear pinion bearing cup with Installer C-4308
(1) and Handle C-4171 (20).
3 - 212
REAR AXLE - C213R
WK
3. Install front pinion bearing cup with Installer D-130
(1) and Handle C-4171 (2).
4. Install front pinion bearing.
5. Apply a light coating of gear lubricant on the lip of
pinion seal. Install seal with Installer C-3972A (1)
and Handle C-4171 (2).
WK
REAR AXLE - C213R
3 - 213
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст