Jeep Grand Cherokee WK. Manual — part 1557
15. Install the input gear and low range planetary
assembly (1) into the front housing.
16. Install the retaining ring (2) holding the input gear
assembly into the front housing.
17. Install the new input shaft seal with Installer 9672
and Handle C-4171.
18. Install the shift sector (2) into the front housing
(1).
21 - 1038
TRANSFER CASE - NV245 - SERVICE INFORMATION
WK
19. Install the retaining ring (2) onto the shift sector
shaft (1).
20. Install the oil pick-up tube o-ring (2) into the rear
housing (1).
21. Prime the oil pickup tube by pouring a little oil into
the tube before installation.
22. Install the oil pick-up tube and screen (1) into the
rear housing.
WK
TRANSFER CASE - NV245 - SERVICE INFORMATION
21 - 1039
23. Install a new front output shaft seal with Installer
6560.
24. Install the front output shaft (2) into the front
housing (1) and the front output shaft front
bearing.
25. Install the retaining ring (2) onto the front output
shaft (1).
26. Install the range fork (1) and range hub (2) as one
into the input gear/low range planetary.
21 - 1040
TRANSFER CASE - NV245 - SERVICE INFORMATION
WK
27. Lubricate mainshaft splines with recommended
transmission fluid.
NOTE: Replace the mode hub retainer if the legs
were distorted during removal.
28. Install the mode hub retainer (1) onto the mode
hub (2).
29. Install the mode hub (2) and mode hub retainer
onto the differential assembly (1). Make sure the
retainer is fully seated onto the differential.
30. Install the differential assembly (1) onto the main-
shaft (2).
WK
TRANSFER CASE - NV245 - SERVICE INFORMATION
21 - 1041
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст