Jeep Grand Cherokee WK. Manual — part 111
6. Unlock the front park brake cable (1).
7. Install the rear carpet back in place.
8. Install the module bracket (2) mounting nuts.
9. Reconnect the module electrical connectors (1).
10. Install the rear sill plates.
5 - 70
BRAKES - BASE - SERVICE INFORMATION
WK
11. Install the drivers seat (Refer to 23 - BODY/
SEATS/SEAT - INSTALLATION).
12. Install the left B-pillar trim panel (Refer to 23 -
BODY/INTERIOR/B-PILLAR
UPPER
TRIM
-
INSTALLATION).
13. Install the left sill plate.
14. Install the center console (1) (Refer to 23 - BODY/
INTERIOR/FLOOR CONSOLE - INSTALLATION).
WK
BRAKES - BASE - SERVICE INFORMATION
5 - 71
15. Install the console rear cover (2) or the DVD
player (if equipped).
16. Install the rear seat bottom (Refer to 23 - BODY/
SEATS/SEAT CUSHION - INSTALLATION).
17. Reconnect the negative battery cable.
5 - 72
BRAKES - BASE - SERVICE INFORMATION
WK
REAR PARKING BRAKE CABLES
1. Install the cable (2) to the vehicle.
2. Install the 2 push pins for the park brake cable to
the stabilizer bar bracket.
3. Install the stabilizer bar bushing clamp bolts.
4. Install the park brake cable (2) into the support
plate.
5. Reconnect the park brake cable at the brake actua-
tor lever (2).
6. Reconnect the rear park brake shoes (1) (Refer to
5
-
BRAKES/PARKING
BRAKE/SHOES
-
INSTALLATION).
7. Install the axle shaft (1).
WK
BRAKES - BASE - SERVICE INFORMATION
5 - 73
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст