Jeep Grand Cherokee WK. Manual — part 110
6. Lock-out the park brake cable (1).
7. Disconnect the brake cables from the equalizer (1).
8. Remove the park brake cables (2) thru the floor
(1).
5 - 66
BRAKES - BASE - SERVICE INFORMATION
WK
9. Raise and support the vehicle.
10. Remove the tire and wheel assembly.
11. Remove the rear caliper (1) (Refer to 5 -
BRAKES/HYDRAULIC/MECHANICAL/DISC
BRAKE CALIPERS - REMOVAL).
12. Remove the disc brake rotor.
13. Remove the axle flange bolts (1).
WK
BRAKES - BASE - SERVICE INFORMATION
5 - 67
14. Remove the axle (1).
15. Disconnect the park brake cable at the brake
actuator lever (2).
16. Disconnect the rear park brake shoes (1) (Refer
to
5
-
BRAKES/PARKING
BRAKE/SHOES
-
REMOVAL).
17. Remove the park brake cable (2) thru the support
plate.
18. Remove the stabilizer bar bushing clamp bolts.
19. Remove the 2 push pins for the park brake cable
to the axle.
20. Remove the cable (2) from the vehicle.
5 - 68
BRAKES - BASE - SERVICE INFORMATION
WK
INSTALLATION
FRONT PARKING BRAKE CABLE
1. Install the front cable (3) at the hand lever mount-
ing bracket (1).
2. Install the front cable (3) at the hand lever (1).
3. Install the front cable at the rear floor bracket.
4. Install the 2 front cable routing clamps and the 3
nuts (2&4).
5. Install the front cable (2) at the equalizer (1).
WK
BRAKES - BASE - SERVICE INFORMATION
5 - 69
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст