Jeep Grand Cherokee WK. Manual — part 74
AXLE SHAFT SEALS
REMOVAL
1. With vehicle in netural, position on hoist.
2. Remove calipers and rotors.
3. Remove speed sensors (2) from axle tube (1)
flange.
4. Remove axle flange nuts (1) from axle (2).
3 - 194
REAR AXLE - C213R
WK
5. Pull axle shaft and backing plate out of axle tube
until axle bearing (1) is exposed.
6. Remove O-ring (2) from the axle bearing.
7. Remove axle shaft (1) from axle tube and backing
plate.
WK
REAR AXLE - C213R
3 - 195
INSTALLATION
1. Install axle shaft (1) into axle tube and backing
plate with new o-ring on axle.
2. Slip O-ring (2) through backing plate, then push
axle through backing plate until bearing (1) is
exposed.
3. Install new O-ring (2) on axle bearing (1).
3 - 196
REAR AXLE - C213R
WK
4. Push axle into axle tube.
5. Install axle (2) flange nuts (1) and tighten to 119
N·m (88 ft. lbs.).
6. Install speed sensors (2) in axle tube (1) flange.
7. Install calipers and rotors.
WK
REAR AXLE - C213R
3 - 197
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст