Jeep Liberty KJ. Manual — part 993
18. Remove 1-2 synchronizer sleeve (1) from syn-
chronizer hub (2).
19. Remove 1-2 synchronizer hub (1) snap ring (2).
NOTE: All snap rings are select fit from the fac-
tory, and must be installed in their original
location.
20. Remove 1-2 synchronizer hub (1), synchronizer
rings and second gear (2) off shaft with a press.
Place second gear (2) on press plates and press
shaft through 1-2 synchronizer hub (1), synchro-
nizer rings and second gear (2)
21 - 16
MANUAL TRANSMISSION - NSG370
KJ
COUNTERSHAFT
The countershaft (1) and 3-4 synchronizer (2) are ser-
viced as an assembly only.
FRONT HOUSING
1. Remove input shaft retainer bolts (2) and remove
retainer (1).
KJ
MANUAL TRANSMISSION - NSG370
21 - 17
2. Remove countershaft bearing (1) retainer (2) bolts
and remove retainers.
3. Remove countershaft bearing (1) from housing (2)
with a hammer and driver.
4. Remove input shaft (1) bearing retainer bolts and
remove retainers (2, 3).
5. Remove input shaft and bearing from housing with
a dead blow hammer.
21 - 18
MANUAL TRANSMISSION - NSG370
KJ
6. Remove input shaft seal (1) from housing (2) with a
hammer and driver.
INPUT SHAFT
1. Remove input shaft bearing (1) snap ring (2).
NOTE: All snap rings are select fit from the fac-
tory, and must be installed in their original
location.
KJ
MANUAL TRANSMISSION - NSG370
21 - 19
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст