Jeep Liberty KJ. Manual — part 999
FRONT HOUSING
1. Install input shaft seal with Installer 9635 (1)
Installer 6448A (2).
2. Install input shaft (1) with bearing (2) into housing.
21 - 40
MANUAL TRANSMISSION - NSG370
KJ
3. Install input shaft (1) bearing retainers (2, 3) and
tighten bolts to 10 N·m (88 in. lbs.).
4. Install input shaft retainer (1) and tighten bolts (2)
to 9 N·m (80 in. lbs.).
5. Install countershaft bearing (1) into housing with
bearing retainer lip (2) facing up.
KJ
MANUAL TRANSMISSION - NSG370
21 - 41
6. Install countershaft bearing (1) retainers (2) and
tighten bolts to 10 N·m (88 in. lbs.).
FINAL ASSEMBLY
1. Install mainshaft (1) onto Build Fixture 9633 (2).
21 - 42
MANUAL TRANSMISSION - NSG370
KJ
2. Install countershaft (1) onto Build Fixture 9633 (2).
3. Install oil slinger (3) on countershaft (2) between
reverse (1) and first gear (4).
CAUTION: Oil slinger is fragile and can crack during installation. Failure to follow these instructions will
result in cracking the oil slinger and lack of oil to first/reverse bearing.
KJ
MANUAL TRANSMISSION - NSG370
21 - 43
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст