Jeep Liberty KJ. Manual — part 1298
5. Secure the glass in the up position using a wood
wedge, tape or equivalent.
6. Remove the bolts. (2, 3 and 5)
7. Disconnect the runout tube clip (4) and remove the
regulator.
8. Disconnect the electrical connector.
INSTALLATION
1. Connect the electrical connector.
2. Loosely install the bolts onto the regulator assem-
bly. (2, 3 and 5)
3. Install the regulator assembly (1).
23 - 92
DOORS - REAR
KJ
4. Tighten the bolts to 9 N·m (80 in. lbs.) using the
sequence shown.
5. Remove the glass support and connect to the reg-
ulator lift plate (2).
KJ
DOORS - REAR
23 - 93
6. Install the waterdam (1). (Refer to 23 - BODY/
DOORS - REAR/WATERDAM - INSTALLATION)
23 - 94
DOORS - REAR
KJ
SWING GATE
TABLE OF CONTENTS
page
page
FLIP-UP GLASS
ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
FLIP-UP GLASS LATCH
FLIP-UP GLASS - HINGE
FLIP-UP GLASS - HINGE COVER
FLIP-UP GLASS SUPPORT CYLINDER
TRIM PANEL
LATCH
LATCH STRIKER
ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
LATCH - ACCESS PANEL
EXTERIOR HANDLE
LOCK CYLINDER
CHECK STRAP
STABILIZER WEDGE/INSERT
ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
HINGE
SWING GATE
ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
KJ
SWING GATE
23 - 95
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст