Jeep Liberty KJ. Manual — part 1297
6. Remove the bolts. (2 and 4)
7. Disconnect the runout tube (1) clip and remove the
regulator (3).
INSTALLATION
1. Loosely install the bolts onto the regulator assem-
bly (2 and 4).
2. Install the regulator assembly (3).
3. Install the runout tube clip (1).
23 - 88
DOORS - REAR
KJ
4. Tighten the bolts to 9 N·m (80 in. lbs.) using the
sequence shown.
5. Remove the glass support and connect the glass to
the regulator lift plate (2).
KJ
DOORS - REAR
23 - 89
6. Install the waterdam (1). (Refer to 23 - BODY/
DOORS - REAR/WATERDAM - INSTALLATION)
23 - 90
DOORS - REAR
KJ
WINDOW REGULATOR - POWER
REMOVAL
1. Remove the waterdam (1). (Refer to 23 - BODY/
DOORS - REAR/WATERDAM - REMOVAL)
2. Raise the glass and line up the lift plate clip with
the hole in the door panel shown.
3. Using a long flat blade or hook type tool, disen-
gage the clip (2) attaching glass retainer to regula-
tor lift plate.
4. Disconnect the glass from the regulator lift plate
and re-install the clip.
KJ
DOORS - REAR
23 - 91
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст