Jeep Liberty KJ. Manual — part 8
•
Inspect for the presence of water in the fuel filter/water separator unit.
Tire Rotation
•
Rotate the tires every 6,250 miles (10 000 km).
Schedule “B”
Follow schedule “B” if you usually operate your vehicle under one or more of the following conditions.
•
Day or night temperatures are below 32°F (0°C).
•
Stop and go driving.
•
Extensive engine idling.
•
Driving in dusty conditions.
•
Short trips of less than 10 miles (16.2 km).
•
More than 50% of your driving is at sustained high speeds during hot weather, above 90°F (32°C).
•
Trailer towing.
•
Heavy loading.
•
Taxi, police, or delivery service (commercial service).
•
Off-road or desert driving.
Miles
6,250
12,500
18,750
25,000
31,250
(Kilometers)
(10 000)
(20 000)
(30 000)
(40 000)
(50 000)
Change the engine oil and engine oil filter.
X
X
X
X
X
Inspect the engine air filter element. Replace as
necessary.
X
X
X
Replace the engine air filter element.
X
X
Inspect the boost pressure solenoid filter. Replace as
necessary.
X
X
X
X
X
Replace the fuel filter/water separator unit.
X
Inspect the brake linings.
X
X
Drain and refill the front and rear axle fluid.
X
X
Miles
37,500
43,750
50,000
56,250
62,500
(Kilometers)
(60 000)
(70 000)
(80 000)
(90 000)
(100
000)
Change the engine oil and engine oil filter.
X
X
X
X
X
Inspect the engine air filter element. Replace as
necessary.
X
X
Replace the engine air filter element.
X
X
X
Inspect the boost pressure solenoid filter. Replace as
necessary.
X
X
X
X
X
Replace the boost pressure solenoid filter, if not
previously replaced.
X
Replace the fuel filter/water separator unit.
X
Replace the engine accessory drive belt.
X
Inspect the brake linings.
X
X
X
Drain and refill the front and rear axle fluid.
X
X
X
Drain and refill the transfer case fluid.
X
Inspect the manual transmission fluid, add as
necessary.
X
0 - 16
LUBRICATION & MAINTENANCE
KJ
Miles
37,500
43,750
50,000
56,250
62,500
(Kilometers)
(60 000)
(70 000)
(80 000)
(90 000)
(100
000)
Drain and refill the automatic transmission fluid,
replace sump filter, and spin-on cooler return filter (if
equipped).
L
X
Miles
68,750
75,000
81,250
87,500
93,750
100,000
(Kilometers)
(110
000)
(120
000)
(130
000)
(140
000)
(150
000)
(160
000)
Change the engine oil and engine oil filter.
X
X
X
X
X
X
Inspect the engine air filter element. Replace
as necessary.
X
X
X
Replace the engine air filter element.
X
X
X
Inspect the boost pressure solenoid filter.
Replace as necessary.
X
X
X
X
X
X
Replace the boost pressure solenoid filter, if not
previously replaced.
X
Replace the engine accessory drive belt.*
X
Replace the engine timing belt and idler pulleys.
X
Inspect the engine timing belt tensioner, replace
if necessary.†
X
Replace the fuel filter/water separator unit.
X
X
Flush and replace the engine coolant/anti-
freeze.
X
Inspect the brake linings.
X
X
Drain and refill the front and rear axle fluid.
X
X
L
Applies only if vehicle is used for frequent trailer towing, or fleet/commercial service.
† The replacement of such component is requested if there is superficial wear, bearing clearance, or evident grease
leak.
* This maintenance is not required if the belt was previously replaced.
Inspection and service should be performed anytime a malfunction is observed or suspected. Retain all receipts.
Schedule “A”
Miles
12,500
25,000
37,500
50,000
(Kilometers)
(20 000)
(40 000)
(60 000)
(80 000)
Change the engine oil and engine oil filter.
X
X
X
X
Inspect the engine air filter element. Replace as
necessary.
X
X
Replace the engine air filter element.
X
X
Inspect the boost pressure solenoid filter. Replace as
necessary.
X
X
X
X
Replace the boost pressure solenoid filter, if not previously
replaced.
X
Replace the fuel filter/water separator unit.
X
X
Inspect the brake linings.
X
X
Inspect the manual transmission fluid, add as necessary.
X
KJ
LUBRICATION & MAINTENANCE
0 - 17
Miles
12,500
25,000
37,500
50,000
(Kilometers)
(20 000)
(40 000)
(60 000)
(80 000)
Inspect the transfer case fluid.
X
Miles
62,500
75,000
87,500
100,000
(Kilometers)
(100 000)
(120 000)
(140 000)
(160 000)
Change the engine oil and engine oil filter.
X
X
X
X
Inspect the engine air filter element. Replace as
necessary.
X
X
Replace the engine air filter element.
X
X
Inspect the boost pressure solenoid filter. Replace as
necessary.
X
X
X
X
Replace the boost pressure solenoid filter, if not previously
replaced.
X
Replace the fuel filter/water separator unit.
X
X
Replace the engine timing belt, and idler pulleys.
X
Inspect the engine timing belt tensioner, replace if
necessary.†
X
Flush and replace the engine coolant/anti-freeze.
X
Replace the engine accessory drive belt.
X
Inspect the brake linings.
X
X
Inspect the transmission fluid, add as necessary.
X
Inspect the transfer case fluid.
X
† The replacement of such component is requested if there is superficial wear, bearing clearance, or evident grease
leak.
Inspection and service should be performed anytime a malfunction is observed or suspected. Retain all receipts.
MAINTENANCE SCHEDULES - GASOLINE ENGINES - EXPORT
There are two maintenance schedules that show the required service for your vehicle.
First is Schedule “A”. It is for vehicles that are not operated under any of the conditions listed under Schedule “B.”
Second is Schedule
(
B
(
. It is for vehicles that are operated under the conditions that are listed below and at the
beginning of the schedule.
•
Day or night temperatures are below 0°C (32°F).
•
Stop and go driving.
•
Extensive engine idling.
•
Driving in dusty conditions.
•
Short trips of less than 16.2 km (10 miles).
•
More than 50% of your driving is at sustained high speeds during hot weather, above 32°C (90°F).
•
Trailer towing.
•
Taxi, police, or delivery service (commercial service).
•
Off-road or desert driving.
Most vehicles are operated under the conditions listed for Schedule “B.”
Use the schedule that best describes your driving conditions. Where time and mileage are listed, follow the interval
that occurs first.
CAUTION: Failure to perform the required maintenance items may result in damage to the vehicle.
0 - 18
LUBRICATION & MAINTENANCE
KJ
At Each Stop for Fuel
•
Check the engine oil level about 5 minutes after a fully warmed engine is shut off. Checking the oil level while
the vehicle is on level ground will improve the accuracy of the oil level reading. Add oil only when the level is
at or below the ADD or MIN mark.
•
Check the windshield washer solvent, add as required.
Once a Month
•
Check the tire pressure and look for unusual wear or damage.
•
Inspect the battery, and clean and tighten the terminals as required.
•
Check the fluid levels of the coolant reservoir, brake master cylinder, and transmission, and add as needed.
•
Check all lights and all other electrical items for correct operation.
At Each Oil Change
•
Change the engine oil filter.
•
Inspect the exhaust system.
•
Inspect brake hoses.
•
Check the coolant level, hoses, and clamps.
•
Inspect manual transmission fluid level — if equipped.
•
After completion of off-road operation, the underside of the vehicle should be thoroughly inspected. Examine
threaded fasteners for looseness.
Schedule “A”
Kilometers
12 000
24 000
36 000
48 000
60 000
(Miles)
(7,500)
(15,000)
(22,500)
(30,000)
(37,500)
[Months]
[6]
[12]
[18]
[24]
[30]
Change the engine oil and engine oil filter.
X
X
X
X
X
Rotate the tires.
X
X
X
X
X
Inspect the engine air filter element, replace if
necessary.
X
Replace the spark plugs.
X
Inspect the brake linings.
X
Inspect the transfer case fluid.
X
Kilometers
72 000
84 000
96 000
108 000
(Miles)
(45,000)
(52,500)
(60,000)
(67,500)
[Months]
[36]
[42]
[48]
[54]
Change the engine oil and engine oil filter.
X
X
X
X
Rotate the tires.
X
X
X
X
Inspect the engine air filter element, replace if
necessary.
X
Inspect and replace the PCV valve, if necessary
L
.
X
Replace the spark plugs.
X
Inspect the brake linings.
X
X
Inspect and replace the Auto Tension Drive Belt, as
needed.
X
Inspect the transfer case fluid.
X
KJ
LUBRICATION & MAINTENANCE
0 - 19
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст