Jeep Liberty KJ. Manual — part 990
4. Mark installation reference marks on propeller
shaft/shafts and remove shafts.
5. Remove transfer case shift cable (2) bracket nuts
(1), cable (2), wiring connector, and vent hose, if
equipped.
6. Remove transfer case, if equipped.
7. Support transmission with jack.
8. Remove transmission mount (1) and crossmember
(2).
9. Remove clutch slave cylinder nuts (1) and remove
cylinder (2).
21 - 4
MANUAL TRANSMISSION - NSG370
KJ
10. Remove backup lamp switch (1) wiring connector
(2).
11. Remove shift lever tower bolts (1) and remove
shift lever housing (2).
12. Remove starter bolts and remove starter.
13. Remove transmission bolts (1,2,3) on 3.7L engine
and remove transmission.
KJ
MANUAL TRANSMISSION - NSG370
21 - 5
14. Remove transmission bolts (1,2,3) on 2.8L diesel
engine and remove transmission.
DISASSEMBLY
1. Remove shift tower (1) bolts (2) and remove tower.
21 - 6
MANUAL TRANSMISSION - NSG370
KJ
2. Through shift tower opening (1) shift two shift rails
(2) forward to engage two gears.
3. Remove back-up lamp switch (1) bolt (2) and
remove switch.
4. Remove countershaft plug (1) from the front hous-
ing (2) with a seal pick.
KJ
MANUAL TRANSMISSION - NSG370
21 - 7
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст