Jeep Liberty KJ. Manual — part 1312
ROCK RAIL
REMOVAL
1. Remove the bolts (2) and remove the rock rail.
2. Remove the bolts (2) and remove the brackets.
23 - 148
EXTERIOR
KJ
INSTALLATION
1. Install the brackets (1) and install the bolts (2).
2. Tighten the bolts to 23 N·m (200 in. lbs.).
3. Install the rock rails (3) and install the bolts (2).
4. Tighten the bolts to 23 N·m (200 in. lbs.).
KJ
EXTERIOR
23 - 149
MOLDING - SILL
REMOVAL
Front Sill Molding
1. Remove the front wheel flare molding as necessary
to gain access to the rivets. (Refer to 23 - BODY/
EXTERIOR/WHEEL OPENING FLARE MOLDING -
REMOVAL)
2. Remove the front rivets (3 and 4).
3. Separate the lower clips (2) using a trim tool
C-4829-A or equivalent.
4. Using a trim stick C-4755 or equivalent, separate
the adhesive tape and upper clips (1) and remove
the front sill molding (3).
23 - 150
EXTERIOR
KJ
Rear Sill Molding
1. Open the rear door and remove the rivets (2 and
3).
2. Separate the lower clips (2) using a trim tool
C-4829-A or equivalent.
3. Using a trim stick C-4755 or equivalent, separate
the adhesive tape and upper clips (1) and remove
the rear sill molding (3).
INSTALLATION
1. Thoroughly clean all residue from the body side sill molding attachment area.
2. Wipe area clean with a 50% solution of water and alcohol and wipe dry.
KJ
EXTERIOR
23 - 151
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст