Jeep Liberty KJ. Manual — part 1345

SIDE RAIL WEATHERSTRIP/RETAINER

REMOVAL

1. Remove the windshield weatherstrip retainer. (Refer to 23 - BODY/WEATHERSTRIP/SEALS/WINDSHIELD

A-PILLAR WEATHERSTRIP/RETAINER - REMOVAL)

2. Remove the two screws.

3. Using a trim stick C-4755 or equivalent, release the push in fasteners and remove the weatherstrip.

INSTALLATION

1. Position the weatherstrip and seat the push in fasteners.

2. Install the two screws.

3. Install the windshield weatherstrip. (Refer to 23 - BODY/WEATHERSTRIP/SEALS/WINDSHIELD A-PILLAR

WEATHERSTRIP/RETAINER - INSTALLATION)

23 - 280

WEATHERSTRIP/SEALS

KJ

WINDSHIELD A-PILLAR WEATHERSTRIP/RETAINER

REMOVAL

1. Open the doors and peel the A-pillar seal away from the A-pillar/windshield and the side rail weather strip

flanges.

2. Remove the seven screws and remove the weatherstrip.

INSTALLATION

1. Position the weatherstrip and install the seven screws.

2. Position the A-pillar seal over the windshield/A-pillar and the side rail weatherstrip flanges and seat fully.

KJ

WEATHERSTRIP/SEALS

23 - 281

COWL/PLENUM SEAL

REMOVAL

1. Remove the cowl grille. (Refer to 23 - BODY/EXTERIOR/COWL GRILLE - REMOVAL)

2. Remove the seal from the plenum flange above the air inlet duct.

INSTALLATION

NOTE: Seal should not be touching the plenum baffle flange seal.

1. Position the seal on the plenum flange and seat fully.

2. Install the cowl grille. (Refer to 23 - BODY/EXTERIOR/COWL GRILLE - INSTALLATION)

23 - 282

WEATHERSTRIP/SEALS

KJ

COWL/PLENUM WINDOW BAFFLE SEAL

REMOVAL

1. Remove the cowl grille. (Refer to 23 - BODY/EXTERIOR/COWL GRILLE - REMOVAL)

2. Remove the seal from the window below the cowl/plenum seal.

INSTALLATION

1. Position the seal against the upper flange of the inner plenum window below the cowl/plenum seal and seat fully.

2. Install the cowl grille. (Refer to 23 - BODY/EXTERIOR/COWL GRILLE - INSTALLATION)

KJ

WEATHERSTRIP/SEALS

23 - 283