Jeep Liberty KJ. Manual — part 1293
8. Install the waterdam (1). (Refer to 23 - BODY/
DOORS - REAR/WATERDAM - INSTALLATION)
23 - 72
DOORS - REAR
KJ
EXTERIOR HANDLE
REMOVAL
1. Remove the waterdam as necessary to gain
access to the handle. (Refer to 23 - BODY/DOORS
- REAR/WATERDAM - REMOVAL)
2. Disconnect the handle rod at the handle.
3. Remove the nuts (1) and remove the handle (2).
KJ
DOORS - REAR
23 - 73
INSTALLATION
1. Install the handle (2).
2. Install the nuts (1) and tighten to 6 N·m (55 in.
lbs.).
3. Connect the handle rod at the handle.
4. Install the waterdam (1). (Refer to 23 - BODY/
DOORS - REAR/WATERDAM - INSTALLATION)
23 - 74
DOORS - REAR
KJ
GLASS RUN CHANNEL
REMOVAL
1. Remove the outer belt molding (1). (Refer to 23 -
BODY/WEATHERSTRIP/SEALS/REAR
DOOR
OUTER BELT MOLDING - REMOVAL)
2. Remove the door glass (1). (Refer to 23 - BODY/
DOORS - REAR/DOOR GLASS - REMOVAL)
3. Remove the front (1) and rear bolts.
4. Peal the weatherstrip and quarter glass out of the
door frame and remove the run channel through
the window opening as an assembly.
KJ
DOORS - REAR
23 - 75
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст