Jeep Liberty KJ. Manual — part 1294
INSTALLATION
1. Install the run channel and quarter glass assembly
through the window opening and into the door
frame.
2. Install the front (1), rear bolts and tighten to 9 N·m
(80 in. lbs.).
3. Install the door glass (1). (Refer to 23 - BODY/
DOORS - REAR/DOOR GLASS - INSTALLATION)
4. Install the outer belt molding (1). (Refer to 23 -
BODY/WEATHERSTRIP/SEALS/REAR
DOOR
OUTER BELT MOLDING - INSTALLATION)
23 - 76
DOORS - REAR
KJ
HINGE
REMOVAL
1. Remove the upper B-pillar trim. (Refer to 23 -
BODY/INTERIOR/B-PILLAR
UPPER
TRIM
-
REMOVAL)
2. Remove the door. (Refer to 23 - BODY/DOORS -
REAR/DOOR - REMOVAL)
3. Remove the two door hinge bolts from the inside of
the B-pillar.
4. Remove the exterior bolts attaching the door
hinges to the B-pillar.
KJ
DOORS - REAR
23 - 77
INSTALLATION
1. Install the hinges.
2. Install the exterior bolts and tighten to 28 N·m (21
ft. lbs.).
3. Install the two inner hinge bolts and tighten to 28
N·m (21 ft. lbs.).
4. Install the door (1). (Refer to 23 - BODY/DOORS -
REAR/DOOR - INSTALLATION)
5. Adjust the door as necessary. (Refer to 23 - BODY/
BODY STRUCTURE/GAP AND FLUSH - SPECIFI-
CATIONS)
6. Install the upper B-pillar trim. (Refer to 23 - BODY/
INTERIOR/B-PILLAR UPPER TRIM - INSTALLA-
TION)
23 - 78
DOORS - REAR
KJ
LATCH
REMOVAL
1. Remove the waterdam (1) as necessary to gain
access to the latch. (Refer to 23 - BODY/DOORS -
REAR/WATERDAM - REMOVAL)
2. Disconnect the lock knob rod at the bell crank and
the outside handle rod at the outside door handle.
3. Remove the screws (2) and remove the latch
assembly (1).
4. Disconnect the electrical connectors.
KJ
DOORS - REAR
23 - 79
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст