Jeep Liberty KJ. Manual — part 943
REAR CROSSMEMBER
REMOVAL
1. Raise and support the vehicle.
2. Support the transmission with a suitable lifting
device.
3. Remove the transmission mount through bolt.
4. Remove the six crossmember bolts (2) and remove
the crossmember.
INSTALLATION
1. Install the crossmember and install the bolts.
2. Tighten the bolts to 47 N·m (35 ft. lbs.)
3. Install transmission mount through bolt and tighten
to 88 N·m (65 ft. lbs.).
13 - 20
FRAME & BUMPERS
KJ
FRONT TOW HOOK
REMOVAL
NOTE: Front fascia must be removed to replace
the stud plate (Refer to 13 - FRAME & BUMPERS/
BUMPERS/FRONT FASCIA - REMOVAL).
1. Remove the nuts and bolt and remove the tow eye/
hook.
INSTALLATION
1. Install the stud plate if previously removed.
2. Install the tow eye/hook.
3. Install the nuts and bolt and tighten to 61 N·m (45
ft. lbs.).
KJ
FRAME & BUMPERS
13 - 21
4. Install the front fascia if the stud plate was replaced
(Refer to 13 - FRAME & BUMPERS/BUMPERS/
FRONT FASCIA - INSTALLATION).
13 - 22
FRAME & BUMPERS
KJ
REAR TOW HOOK
REMOVAL
1. Remove the bolts and remove the tow hook/eye.
INSTALLATION
1. Install the tow hook/eye.
2. Install the bolts and tighten to 88 N·m (65 ft. lbs.).
KJ
FRAME & BUMPERS
13 - 23
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст