Jeep Liberty KJ. Manual — part 941
SPECIFICATIONS - TORQUE
DESCRIPTION
N·m
Ft. Lbs.
In. Lbs.
Engine cradle crossmember front mounting bolts
122
90
—
Engine cradle crossmember rear mounting bolts
115
85
—
Engine mount through bolts/nuts
88
65
—
Front skid plate bolts
61
45
—
Front tow hook nuts/bolt
61
45
—
Fuel tank skid plate
88
65
—
Rear crossmember bolts
47
35
—
Rear tow hook bolts
88
65
—
Trailer hitch bolts
88
65
—
Transfer case skid plate bolts
34
25
—
Transmission mount through bolt/nut
88
65
—
Fig. 2 SIDE VIEW
13 - 12
FRAME & BUMPERS
KJ
FRONT SKID PLATE
REMOVAL
1. Raise and support the vehicle.
2. Remove the skid plate bolts and remove the skid
plate.
INSTALLATION
1. Install the skid plate.
2. Install the bolts and tighten to 61 N·m (45 ft. lbs.).
KJ
FRAME & BUMPERS
13 - 13
ENGINE CRADLE CROSSMEMBER
REMOVAL
1. Install engine support tool 8534 or equivalent.
2. Raise and support the vehicle.
3. Remove the lower control arms (Refer to 2 - SUS-
PENSION/FRONT/LOWER
CONTROL
ARM
-
REMOVAL).
4. Remove the stabilizer bar (Refer to 2 - SUSPEN-
SION/FRONT/STABILIZER BAR - REMOVAL).
13 - 14
FRAME & BUMPERS
KJ
5. Remove the front axle, if equipped (Refer to 3 -
DIFFERENTIAL & DRIVELINE/FRONT AXLE -
REMOVAL).
6. Remove the power steering rack (Refer to 19 -
STEERING/GEAR - REMOVAL).
7. Loosen the engine mount through bolts.
KJ
FRAME & BUMPERS
13 - 15
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст