Jeep Liberty KJ. Manual — part 1001
17. Install countershaft bolt (1) into the front housing
(2) and tighten to 100 N·m (74 ft. lbs.).
18. Install countershaft plug (1) in front housing (2)
with Installer 7829-A and Handle C-4171.
19. Move shift rails to neutral.
20. Apply MOPAR™ Gasket Maker to shift tower (1).
21. Install shift tower (1) and tighten bolts (2) to 14
N·m (10 ft. lbs.).
21 - 48
MANUAL TRANSMISSION - NSG370
KJ
22. Install back up lamp switch (1) and bolt (2).
INSTALLATION
1. Install transmission on engine.
2. On 3.7L engine tighten bolts (1) to 41 N·m (30 ft.
lbs.). Tighten bolts (2) to 67 N·m (50 ft. lbs.).
Tighten bolts (3) to 54 N·m (40 ft. lbs.).
KJ
MANUAL TRANSMISSION - NSG370
21 - 49
3. On 2.8L diesel engine tighten bolts (1) to 41 N·m
(30 ft. lbs.). Tighten bolts (2) to 67 N·m (50 ft. lbs.).
Tighten bolts (3) to 54 N·m (40 ft. lbs.).
4. Clean shift tower and mating surface then apply
Mopar Gasket Maker to shift tower.
5. Install shift tower (2) and tighten bolts (1) to 14
N·m (10 ft. lbs.).
6. Install transmission crossmember and tighten bolts
to 47 N·m (35 ft. lbs.). Install transmission mount
bolts and tighten to 47 N·m (35 ft. lbs.).
7. Install backup lamp (2) wiring connector (1).
21 - 50
MANUAL TRANSMISSION - NSG370
KJ
8. Install clutch slave cylinder (2) and mounting nuts
(1).
9. Install transfer case and shift linkage, if equipped.
10. Install transfer case wiring connector and vent
hose.
11. Install propeller shaft/shafts with reference marks
aligned.
12. Remove fill plug (1) and fill transmission to
specifications.
SPECIFICATIONS
MANUAL TRANSMISSION - NSG370
TORQUE SPECIFICATIONS
DESCRIPTION
N·m
Ft. Lbs.
In. Lbs.
Drain Plug
30
22
-
Fill Plug
30
22
-
Shift Tower Bolts
14
10
-
Housing Bolts
28
21
-
Transmission Mounting
Bolts
47
35
-
Input Shaft Retainer Bolts
9
-
80
Bearing Retainer Bolts
10
-
88
Shift Rail Support Bolts
8
-
71
KJ
MANUAL TRANSMISSION - NSG370
21 - 51
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст