Jeep Liberty KJ. Manual — part 1319
INSTRUMENT PANEL END CAP
REMOVAL
1. Before proceeding with the following repair proce-
dure, review all warnings and cautions. (Refer to
23 - BODY/INSTRUMENT PANEL - WARNING)
2. Open the door.
3. Using the finger indent, grasp and remove the side
cover (1).
INSTALLATION
1. Before proceeding with the following repair proce-
dure, review all warnings and cautions. (Refer to
23 - BODY/INSTRUMENT PANEL - WARNING)
2. Position the side panels (1) and seat the clips fully.
23 - 176
INSTRUMENT PANEL
KJ
INSTRUMENT PANEL DRIVER SIDE BEZELS
REMOVAL
1. Before proceeding with the following repair proce-
dure, review all warnings and cautions. (Refer to
23 - BODY/INSTRUMENT PANEL - WARNING)
2. Using a trim stick C-4755 or equivalent, disengage
the bezels (2) on either side of the steering col-
umn.
INSTALLATION
1. Before proceeding with the following repair proce-
dure, review all warnings and cautions. (Refer to
23 - BODY/INSTRUMENT PANEL - WARNING)
2. Position the appropriate divers side bezels (2) on
either side of the steering column and seat the
attachment clips.
KJ
INSTRUMENT PANEL
23 - 177
INSTRUMENT PANEL CENTER BEZEL
REMOVAL
1. Before proceeding with the following repair proce-
dure, review all warnings and cautions. (Refer to
23 - BODY/INSTRUMENT PANEL - WARNING)
2. Remove the screw from inside the cubby bin next
to the power outlet.
3. Using a trim stick C-4755 or equivalent, remove the
center bezel (3) from the instrument panel assem-
bly.
4. Disconnect the electrical and vacuum connectors.
INSTALLATION
1. Before proceeding with the following repair proce-
dure, review all warnings and cautions. (Refer to
23 - BODY/INSTRUMENT PANEL - WARNING)
2. Connect the electrical and vacuum connectors.
3. Position the center bezel (3) and seat the retaining
clips starting with the lower clips first.
4. Install the screw in the cubby bin next to the power
outlet.
23 - 178
INSTRUMENT PANEL
KJ
INSTRUMENT PANEL PASSENGER SIDE BEZEL
REMOVAL
1. Before proceeding with the following repair procedure, review all warnings and cautions. (Refer to 23 - BODY/
INSTRUMENT PANEL - WARNING)
On vehicles equipped with a grab handle:
1. Using a trim stick C-4755 or equivalent, remove the
grab handle end caps.
2. Disconnect the electrical connector, if equipped.
3. Remove the grab handle screws.
4. Remove the grab handle and bezel assembly.
On vehicles without a grab handle:
1. Using a trim stick C-4755 or equivalent, release the
retaining clips and remove the passenger side
bezel (5).
INSTALLATION
1. Before proceeding with the following repair procedure, review all warnings and cautions. (Refer to 23 - BODY/
INSTRUMENT PANEL - WARNING)
KJ
INSTRUMENT PANEL
23 - 179
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст