Jeep Compass (2019 year). Instruction — part 32

Phone/Bluetooth

After pressing the “Phone/Bluetooth” button on the touch-
screen, the following settings will be available:

Setting Name

Selectable Options

Do Not Disturb

List of Settings

NOTE:
Press “Do Not Disturb” to access the available settings. The following settings are: Auto Reply (both, text, call), Auto
Reply Message (custom, default) and Custom Auto Reply Message (create message).

Paired Phones

List Of Paired Phones

NOTE:
This feature shows which phones are paired to the Phone/Bluetooth system. For further information, refer to the
Uconnect Owner’s Manual Supplement.

Paired Audio Sources

List Of Paired Audio Sources

NOTE:
This feature shows which Audio Sources are paired to the Phone/Bluetooth system. For further information, refer to
the Uconnect Owner’s Manual Supplement.

500

MULTIMEDIA

SiriusXM Setup — If Equipped

After pressing the “SiriusXM Setup” button on the touch-
screen, the following settings will be available:

Setting Name

Selectable Options

Channel Skip

List Of Channels

NOTE:
SiriusXM can be programmed to designate a group of channels that are the most desirable to listen to or to exclude
undesirable channels while scanning. This feature allows you to select the channels you would like to skip.

Subscription Info

Sirius ID

NOTE:
New vehicle purchasers or lessees will receive a free limited time subscription to SiriusXM Satellite Radio with your
radio. Following the expiration of the free services, it will be necessary to access the information on the Subscription
Information screen to re-subscribe.

1. Press the “Subscription Info” button on the touchscreen to access the Subscription Information screen.

2. Write down the Sirius ID numbers for your receiver. To reactivate your service, either call the number listed on the

screen or visit the provider online.

SiriusXM Travel Link is a separate subscription.

10

MULTIMEDIA

501

Restore Settings

After pressing the “Restore Settings” button on the touch-
screen, the following settings will be available:

Setting Name

Selectable Options

Restore Settings

OK

Cancel

NOTE:
When this feature is selected it will reset all of the audio settings to their default settings.

Clear Personal Data

After pressing the “Clear Personal Data” button on the
touchscreen, the following settings will be available:

Setting Name

Selectable Options

Clear Personal Data

OK

Cancel

NOTE:
When this feature is selected it will remove all personal data including Bluetooth devices and presets.

502

MULTIMEDIA

System Information

After pressing the “System Information” button on the
touchscreen, the following settings will be available:

Setting Name

Selectable Options

Software Licenses

Software Information Screen

NOTE:
When this feature is selected, a “Licensing Information” screen will appear, displaying a licensing information website
for the radio.

Map Update

Download System Information To

USB

Generate Request Code

NOTE:
The “Download System Information To USB” will create a special USB required for Map updates of the radio.
Whereas the “Generate Request Code” will display a code for the user to input online when downloading the maps.

10

MULTIMEDIA

503

STEERING WHEEL AUDIO CONTROLS — IF
EQUIPPED

The remote sound system controls are located on the rear
surface of the steering wheel at the three and nine o’clock
positions.

The right-hand control is a rocker-type switch with a
push-button in the center and controls the volume and
mode of the sound system. Pushing the top of the rocker
switch will increase the volume, and pushing the bottom of
the rocker switch will decrease the volume.

Pushing the center button will make the radio switch
between the various modes available (AM/FM/SXM or
Media etc.).

The left-hand control is a rocker-type switch with a push-
button in the center. The function of the left-hand control is
different depending on which mode you are in

The following describes the left-hand control operation in
each mode.

Radio Operation

Pushing the top of the switch will “Seek” up for the next
listenable station and pushing the bottom of the switch will
“Seek” down for the next listenable station.

The button located in the center of the left-hand control
will tune to the next preset station that you have pro-
grammed in the radio preset button.

Media Mode

Pushing the top of the switch once goes to the next track on
the selected media (AUX/USB/Bluetooth). Pushing the
bottom of the switch once goes to the beginning of the
current track, or to the beginning of the previous track if it
is within eight seconds after the current track begins to
play.

Remote Sound System Controls

504

MULTIMEDIA

AUX/USB/MP3 CONTROL

There is a USB and AUX Jack in the center console. This
feature allows an external device to be plugged into the
USB or AUX ports.

If equipped, there may also be another USB port located on
the back of the center console.

The USB port allows interaction with a connected smart-
phone via Android Auto or Apple CarPlay if the vehicle is
equipped with a Uconnect 4/4C NAV. The port is for
charge only if the vehicle is equipped with a Uconnect 3
with 5–inch Display, a Uconnect 4 with 7–inch Display or a
Uconnect 4C/4C NAV With 8.4–inch Display.

For further information, refer to the Uconnect Owner’s
Manual Supplement.

Center Console USB Port

1 — USB Port
2 — AUX Jack

Charge Only USB Port

10

MULTIMEDIA

505

RADIO OPERATION AND MOBILE PHONES

Under certain conditions, the mobile phone being on in
your vehicle can cause erratic or noisy performance from
your radio. This condition may be lessened or eliminated
by relocating the mobile phone antenna. This condition is
not harmful to the radio. If your radio performance does
not satisfactorily “clear” by the repositioning of the an-
tenna, it is recommended that the radio volume be turned
down or off during mobile phone operation when not
using Uconnect (if equipped).

Regulatory And Safety Information

USA/CANADA

Exposure to Radio Frequency Radiation

The radiated output power of the internal wireless radio is
far below the FCC and IC radio frequency exposure limits.
Nevertheless, the wireless radio will be used in such a
manner that the radio is 8 in (20 cm) or further from the
human body.

The internal wireless radio operates within guidelines
found in radio frequency safety standards and recommen-
dations, which reflect the consensus of the scientific com-
munity.

The radio manufacturer believes the internal wireless radio
is safe for use by consumers. The level of energy emitted is
far less than the electromagnetic energy emitted by wire-
less devices such as mobile phones. However, the use of
wireless radios may be restricted in some situations or
environments, such as aboard airplanes. If you are unsure
of restrictions, you are encouraged to ask for authorization
before turning on the wireless radio.

The following regulatory statement applies to all Radio
Frequency (RF) devices equipped in this vehicle:

This device complies with Part 15 of the FCC Rules and
with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, in-

cluding interference that may cause undesired opera-
tion.

NOTE:

Changes or modifications not expressly approved

by the party responsible for compliance could void the
user’s authority to operate the equipment.

506

MULTIMEDIA

NOTE:
• This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interfer-
ence in a residential installation. This equipment gener-
ates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio commu-
nications. However, there is no guarantee that interfer-
ence will not occur in a particular installation.

• If this equipment does cause harmful interference to

radio or television reception, which can be determined
by turning the equipment off and on, the user is encour-
aged to try to correct the interference by one or more of
the following measures:

1. Increase the separation between the equipment and

receiver.

2. Consult an authorized dealer or an experienced radio

technician for help.

UCONNECT VOICE RECOGNITION QUICK TIPS

Introducing Uconnect

Start using Uconnect Voice Recognition with these helpful
quick tips. It provides the key Voice Commands and tips
you need to know to control your Uconnect 3, Uconnect 4,
or Uconnect 4C/4C NAV system.

Uconnect 3

10

MULTIMEDIA

507

If you see the NAV icon on the bottom bar or in the Apps
menus of your 8.4-inch touchscreen, you have the
Uconnect 4C NAV system. If not, you have a Uconnect 4C
with 8.4-inch display system.

Uconnect 4

Uconnect 4C/4C NAV

508

MULTIMEDIA

Get Started

All you need to control your Uconnect system with your
voice are the buttons on your steering wheel.

Helpful hints for using Voice Recognition:
• Visit UconnectPhone.com to check mobile device and

feature compatibility and to find phone pairing instruc-
tions.

• Reduce background noise. Wind and passenger conver-

sations are examples of noise that may impact recogni-
tion.

• Speak clearly at a normal pace and volume while facing

straight ahead. The microphone is positioned on the
rearview mirror and aimed at the driver.

• Each time you give a Voice Command, you must first

push either the Voice Recognition (VR) or Phone button,
wait until after the beep, then say your Voice Command.

• You can interrupt the help message or system prompts

by pushing the VR or Phone button and saying a Voice
Command from the current category.

Uconnect Voice Command Buttons

1 — Push To Initiate Or To Answer A Phone Call, Send Or Receive
A Text
2 — For All Radios: Push To Begin Radio, Media, Or Climate Func-
tions. For Uconnect 4C NAV System Only: Push To Begin Naviga-
tion Function
3 — Push To End Call

10

MULTIMEDIA

509

Basic Voice Commands

The basic Voice Commands below can be given at any
point while using your Uconnect system.

Push the VR button

. After the beep, say:

• “ Cancel” to stop a current voice session
• “ Help” to hear a list of suggested Voice Commands
• “ Repeat” to listen to the system prompts again
Notice the visual cues that inform you of your voice
recognition system’s status. Cues appear on the touch-
screen.

Radio

Use your voice to quickly get to the AM, FM or SiriusXM
Satellite Radio stations you would like to hear. (Subscrip-
tion or included SiriusXM Satellite Radio trial required.)

Push the VR button

. After the beep, say:

• “ Tune to ninety-five-point-five FM”
• “ Tune to Satellite Channel Hits 1”

TIP:

At any time, if you are not sure of what to say or want

to learn a Voice Command, push the VR button

and say

“ Help.” The system provides you with a list of com-
mands.

Uconnect 3 Radio

510

MULTIMEDIA

Uconnect 4 Radio

Uconnect 4C/4C NAV Radio

10

MULTIMEDIA

511

Media

Uconnect offers connections via USB, Bluetooth and auxil-
iary ports (if equipped). Voice operation is only available
for connected USB and AUX devices. (Remote CD player
optional and not available on all vehicles.)

Push the VR button

. After the beep, say one of the

following commands and follow the prompts to switch
your media source or choose an artist.
• “ Change source to Bluetooth”
• “ Change source to AUX”
• “ Change source to USB”
• “ Play artist Beethoven”; “ Play album Greatest Hits”;

“ Play song Moonlight Sonata”; “ Play genre Classical”

TIP:

Press the Browse button on the touchscreen to see all

of the music on your USB device. Your Voice Command
must match exactly how the artist, album, song and genre
information is displayed.

Uconnect 3 Media

512

MULTIMEDIA

Uconnect 4 Media

Uconnect 4C/4C NAV Media

10

MULTIMEDIA

513

Phone

Making and answering hands-free phone calls is easy with
Uconnect. When the Phonebook button is illuminated on
your

touchscreen,

your

system

is

ready.

Check

UconnectPhone.com for mobile phone compatibility and
pairing instructions.

Push the VR button

or Phone button

. After the

beep, say one of the following commands:
• “ Call John Smith”
• “ Dial 123-456-7890 and follow the system prompts”
• “ Redial (call previous outgoing phone number)”
• “ Call back (call previous incoming phone number)”

TIP:

When providing a Voice Command, push the VR

button

or Phone button

and say “ Call,” then

pronounce the name exactly as it appears in your phone
book. When a contact has multiple phone numbers, you
can say “ Call John Smith work.”

Uconnect 3 Phone

514

MULTIMEDIA

Uconnect 4 Phone

Uconnect 4C/4C NAV Phone

10

MULTIMEDIA

515