Engines Iveco C10,C13, Cursor 10, Cursor 13. Manual — part 51
Figure 85
Figure 86
Only for types: F3BE9687A*E001 - F3BE9687B*E001 -
F3B9687C*E001
- driving belt.
To mount belt (1), belt tensioner (2) has to be operated by
proper tooling (3) according to the direction indicated by the
arrow in Figure.
106223
ASSEMBLY DIAGRAM OF FAN — WATER PUMP —
ALTERNATOR DRIVE BELT
1. Alternator — 2. Electromagnetic coupling —
3. Water pump — 4. Crankshaft
108844
COMPRESSOR CONTROL BELT
ASSEMBLY DIAGRAM
1. Alternator — 2. Climate control system compressor —
3. Electromagnetic coupling — 4. Water pump —
5. Crankshaft — 6. Spring belt.
108845
Figure 87
28
SECTION 3 - INDUSTRIAL APPLICATION
F3B CURSOR ENGINES
Base - May 2007
Figure 88
Figure 89
Figure 90
Fit the arm 99360585 onto the engine lifting hooks and hook
the arm onto the hoist.
Take out the screws fixing the brackets 99361036 to the
rotary stand. Lift the engine and remove the above-mentioned
brackets from it.
Complete engine assembly with the following parts, tightening
the fixing screws or nuts to the prescribed torque:
-
mount the drive (1);
-
mount the engine supports;
-
mount the oil pressure adjuster valve (1).
104247
104246/A
104782
For all types
Only for types: F3BE0684H*E901 and F3BE0684G*E901
Assemble the following components and tighten their fixtures
to the specified torque:
-
the fixed belt tightening roller (1);
-
the support (2);
-
the automatic belt tightener (3);
-
the damping flywheel (4) and the pulley beneath it;
-
all the coolant pipes (5);
-
the water pump (6);
-
the fixed belt tightening roller (7);
-
the thermostat assembly (8).
Figure 91
104781
SECTION 3 - INDUSTRIAL APPLICATION
29
F3B CURSOR ENGINES
Figure 92
Assemble the alternator support (3) on the engine and tighten
the locking screws to the specified torque.
Assemble the alternator (4) and tighten the locking screws to
the specified torque value.
Assemble the compressor (1) complete with its support (2)
on the engine and tighten the locking screws to the specified
torque.
104780
Assemble the belt on the pulleys and tightening rollers, making
sure that it is correctly inserted in its seats.
The belt tighteners are of the automatic type and so
no further adjustment is required after assembly.
NOTE
30
SECTION 3 - INDUSTRIAL APPLICATION
F3B CURSOR ENGINES
Base - May 2007
A. Resistance for engine warming - B. Fuel filter clogged signalling switch - C. Fuel temperature sensor - D. Engine rpm sensor
on camshaft - E. Starter motor - G. Alternator - H. Temperature/air pressure sensor - I. Conditioner compressor -
L. EDC 7 control unit - M. Connector on engine head for connection with injector solenoid valves -
N. Water temperature for EDC 7 - O. Water temperature sensor - P. Oil pressure/temperature transmitter -
Q. Engine speed on flywheel sensor - R. Low oil pressure transmitter.
ENGINE RIGHT-HAND SIDE VIEW
ENGINE LEFT-HAND SIDE VIEW
Figure 1
Figure 2
104790
104791
Components on the engine F3B (For types: F3BE0684H*E901 - F3BE0684G*E901)
SECTION 3 - INDUSTRIAL APPLICATION
33
F3B CURSOR ENGINES
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст