Engine Iveco C10/C13/C78/Cursor 13/Cursor 78. Manual — part 85
4
SECTION 3 - INDUSTRIAL APPLICATION
PART ONE - MECHANICAL COMPONENTS
SECTION 3 - INDUSTRIAL APPLICATION
5
6
SECTION 3 - INDUSTRIAL APPLICATION
Protect the electric parts before doing any washing with
high-pressure jets.
Before securing the engine on the rotary stand, remove:
Handle all parts extremely carefully. Never get your
hands or fingers between pieces.
Wear the required safety clothing such as goggles,
gloves and safety shoes.
-
the engine electric cable, disconnecting it from the control
unit and from all the sensors/transmitters connected to it;
If present:
-
using a suitable tool (3), work in the direction of the arrow
on the tightener and remove the compressor drive belt
(1);
-
remove the compressor (2) together with the engine
support.
-
Remove the oil pressure adjuster valve (1).
-
Remove the engine supports;
-
remove the drive (1).
Figure 1
Figure 2
Figure 3
99357
99253
99254
Figure 4
99358
-
Secure the engine to the rotary stand with the brackets
993601036 (1).
-
Drain the lubricating oil from the sump.
ENGINE ASSEMBLY DISASSEMBLY
NOTE
SECTION 3 - INDUSTRIAL APPLICATION
7
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст