Iveco Daily. Manual — part 225
124
POWER TAKE OFF
D
AILY
Base - May 2004
62092
Figure 1
Power take offs are applied to secondary shaft on gearbox left side instead of cover (1).
Fill and check gearbox oil level.
NOTE
POWER TAKE OFF
125
D
AILY
SPECIFICATIONS AND DATA
TYPE
Hidrocar 20Z1
Hidrocar 20 Z2
Application
5 S 200
6 S 300
Gear ratio I, PTO(*) output revs., normal PTO(*) input revs.
1
0.910
PTO(*) output rated torque at 1500 rpm (Nm)
120
180
Expected duration at rated torque and at 1500 rpm
hours
500
Rotation direction (with respect to engine)
Opposite
Control
Electric
Assembly side (with respect to running direction)
Left side
Torque obtainable from gearbox (Nm)
175
303
Oil capacity (litres)
~ 0.6
÷ 0.4
(*) = Power Take Off
Drive gear taper roller bearing axial backlash
0
÷ 0.1 mm
Drive gear taper roller bearing axial backlash
adjustment
by shims
Drive gear taper roller bearing axial backlash
adjusting ring thickness
0.1 - 0.2 - 0.3 - 0.5 mm
62181
Figure 2
126
POWER TAKE OFF
D
AILY
Base - May 2004
DESCRIPTION
TORQUE
DESCRIPTION
Nm
kgm
1
M16x1.5 actuator fixing tang
50
5
2
Switch fixing
50
5
3*
Flange fixing screw
25
2.5
-
M10 nuts for fixing PTO to gearbox
35
÷ 39
3.5
÷ 3.9
* Smear screw thread with LOCTITE 242
62094
62093
Figure 3
Figure 4
POWER TAKE OFF COMPONENTS
ASSEMBLY STANDARDS
Parts (*): sealing rings and bearings shall be smeared with
grease POLIMER 400.
Adjusting ring (
♦) thickness shall guarantee taper roller
bearing axial backlash equal to 0
÷ 0.1 mm.
Screw thread (
•) shall be smeared with Loctite 242.
Sealing ring (1) shall be fitted with 6 mm sinking from power
take off housing (2) surface.
POWER TAKE OFF
127
D
AILY
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст