Iveco Daily. Manual — part 354
86420
Figure 65
Figure 66
ADDITIONAL HEATER UNIT
Removal - Refitting
Set the container for collecting engine coolant near the
additional heater delivery and return pipes.
- Disconnect the heater fan power cable electrical
connection (3) and release it from the anchoring clips, if
any;
- Loosen clamp (7) and disconnect the additional heater
engine coolant delivery pipe (6). Plug the pipe end
properly to prevent leaks;
- Loosen clamp (5) and disconnect the additional heater
engine coolant delivery pipe (4). Plug the pipe end
properly to prevent leaks;
- Loosen the fastening screws (1) and remove the
additional heater (2) from the vehicle.
- Release the anchoring clips (1) and remove rear seat
lower side upholstery (2).
- Loosen the fastening screws (3) and remove the
additional heater rear protection (4).
For refitting, reverse the removal procedure and top up engine
coolant as described in the relevant Section.
Set the vehicle on level ground taking the required safety
precautions.
Disconnect battery negative and positive terminals.
Prepare a proper container to collect engine coolant.
Removal
86421
Refitting
58
PASSENGER’S COMPARTMENT HEATING AND VENTILATION SYSTEM
D
AILY
Set the container for collecting engine coolant near the
additional heater delivery and return pipes.
Figure 67
86422
ADDITIONAL HEATER CIRCUIT ENABLING SOLENOID VALVE
Removal - Refitting
Set the vehicle on level ground taking the required safety precautions.
Disconnect battery negative and positive terminals.
Prepare a proper container to collect engine coolant.
- Loosen clamp (6) and disconnect coolant delivery pipe
(5) to additional heater;
Plug the pipe end properly to prevent leaks;
- Loosen clamp (3) and disconnect coolant return pipe (4)
from additional heater;
Plug the pipe end properly to prevent leaks;
- Release the anchoring clips and move aside the expansion
tank breather pipe (2) to clear the work area.
- Disconnect the additional heater circuit enabling solenoid
valve (9) power cable electrical connection (1);
- Loosen clamp (11) and disconnect coolant return pipe
(10) to engine;
Plug the pipe end properly to prevent leaks;
- Loosen clamp (8) and disconnect coolant return pipe (7)
from cab heater;
Plug the pipe end properly to prevent leaks;
Removal
Refitting
For refitting, reverse the removal procedure and top up engine
coolant as described in the relevant Section.
PASSENGER’S COMPARTMENT HEATING AND VENTILATION SYSTEM
59
D
AILY
60
PASSENGER’S COMPARTMENT HEATING AND VENTILATION SYSTEM
D
AILY
SCHEDULED MAINTENANCE
1
D
AILY
Base - May 2004
SECTION 13
Scheduled maintenance
Page
MAINTENANCE
3
. . . . . . . . . . . . . . . . . . . . . . . . .
-
Table of maintenance services
3
. . . . . . . . . . . . .
8140 ENGINE VEHICLES
3
. . . . . . . . . . . . . . . . . .
-
Inspection and/or maintenance interventions
4
. .
-
Extra plan operations
4
. . . . . . . . . . . . . . . . . . . .
F1A ENGINE VEHICLES
5
. . . . . . . . . . . . . . . . . . .
-
Inspection and/or maintenance interventions
5
. .
-
Extra plan operations
6
. . . . . . . . . . . . . . . . . . .
F1C ENGINE VEHICLES
7
. . . . . . . . . . . . . . . . . . .
-
Inspection and/or maintenance interventions
8
. .
-
Extra plan operations
8
. . . . . . . . . . . . . . . . . . .
DIAGRAM OF CHECK AND/OR MAINTENANCE
POINTS
9
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MAINTENANCE OPERATIONS
10
. . . . . . . . . . . .
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст