Iveco Daily. Manual — part 439
282
ELECTRIC/ELECTRONIC SYSTEM
D
AILY
Base - May 2004
Closing
Press open/close push
button
Yes
Engine start in closing
Position and speed control with engine encoder
Ramp start
Constant speed travel to next stage
Complete closing
Yes
Center cut out
Engine cut out
Micro switch complete
opening position engaged?
No
Encoder reading of door
nearly closed
Deceleration
Micro switch engaged on lock
No
Reposition
on opening
ELECTRIC/ELECTRONIC SYSTEM
283
D
AILY
Operating diagram
REMOTE
CONTROL
CLOSES
MECHANICAL
KEY OPENS
REMOTE
CONTROL
OPENS
OPERATOR door
ROTO door
LOCKED
CLOSED
OPERATOR door
ROTO door
UNLOCKED
CLOSED
INSTRUMENT
PANEL PUSH
BUTTON
OPENS
REMOTE
CONTROL
OPENS
OPERATOR door
ROTO door
UNLOCKED
OPEN
EMERGENCY
HANDLE.
REMOTE
CONTROL
CLOSES
INSTRUMENT
PANEL PUSH
BUTTON
CLOSES
LOCKED
OPEN
REMOTE
CONTROL
OPENS
UNLOCKED
OPEN
REMOTE
CONTROL
CLOSES
UNLOCKED
CLOSED
INSTRUMENT
PANEL PUSH
BUTTON
CLOSES
UNLOCKED
CLOSED
REMOTE
CONTROL
CLOSES
MECHANICAL
KEY
LOCKED
CLOSED
N.B.: As a consequence of use by
IVECO of passive type door locks,
disconnected operation may occur
between operator and rotating sliding
door opening and closing.
OPERATOR door
ROTO door
OPERATOR door
ROTO door
OPERATOR door
ROTO door
OPERATOR door
ROTO door
OPERATOR door
ROTO door
284
ELECTRIC/ELECTRONIC SYSTEM
D
AILY
Base - May 2004
- Remove the snap-fitted panel (Ref. A) to gain access to
the panel fastening screws (Ref. B).
- Slacken the 4 fastening screws, two on either side, of the
lower panel (Ref. A).
Electronic tachograph control unit housing
assembly
Fasten the control unit to the support, insert the 3
connectors, eliminating the bridges between the connectors
(white, yellow and brown) and apply the seals (ref. A).
B
A
A
A
LOWER DASHBOARD SNAP-FITTED PANEL
LOWER PANEL FASTENING SCREWS
LOWER PANEL FASTENING SCREWS
CONNECTIONS AND TACHOGRAPH CONTROL
UNIT SUPPORT
A
Figure 328
Figure 329
Figure 330
Figure 331
8782
8783
8781
8670
ELECTRIC/ELECTRONIC SYSTEM
285
D
AILY
Assembling the tachograph control unit
support on the dashboard
Use the six screws to fasten the tachograph control unit
support to the dashboard.
TACHOGRAPH CONTROL UNIT
TACHOGRAPH CONTROL UNIT FASTENING TO
DASHBOARD
TACHOGRAPH CONTROL UNIT SUPPORT FASTENING SCREWS
Figure 332
8784
8785
8786
Figure 333
Figure 334
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст