Iveco EuroCargo (12 to 26 t). Manual — part 201
79610
Figure 67
- Pull plugs (2) out of the seat;
- operate on check tongues and remove switches (1) from
their opening.
Removal
!
Before performing repair interventions, disconnect
batteries and observe safety rules.
79611
Figure 68
- Disconnect electric connectors and remove switch (1)
sets;
- unscrew instrument panel (3) securing screws (2).
!
Mark electric wiring harness to make re-attaching
operations easier.
79612
Figure 69
- Detach instrument panel (1) from its seat.
Refitting
Perform re-attaching operations inverting described
detaching operations.
553710
MIDDLE INSTRUMENT PANEL
Removal
!
Before performing repair interventions, disconnect
batteries and observe safety rules.
79613
Figure 70
- Unscrew middle instrument panel securing screws (1);
- operate on check tongues and remove lower glove
compartments (3) to access the screws underneath;
- remove the knobs (2) of air-conditioner controls in order
to access the screw underneath.
E
URO
C
ARGO
T
ECTOR
12-26 t
36
BODY - CHASSIS
Base — February 2003
INSTRUMENT PANEL
79614
79616
79615
79617
79618
Figure 71
Figure 72
Figure 73
Figure 74
Figure 75
- Unscrew securing screw (2) and detach the panel of
air-conditioner controls.
- Unscrew screws (1) securing the device of air-conditioner
controls (3) to middle instrument panel;
- unscrew screws (2) securing the middle instrument panel
on the lower side to the covering.
- Pull out middle instrument panel (1);
- disconnect electric connections (1).
- Detach middle instrument panel (1) from the vehicle.
Refitting
Perform detaching procedure:
- instrument panel (OP. 553710) and middle instrument
panel;
- let off engine cooling water and drain conditioning system
(if present);
- lift lid (1), unscrew securing screws (2) and remove glove
compartment from the vehicle (3).
!
Mark electric wiring harness to make re-attaching
operations easier.
Perform re-attaching operations inverting described
detaching operations.
552211
INSTRUMENT PANEL COVERING
Removal
E
URO
C
ARGO
T
ECTOR
12-26 t
BODY - CHASSIS
37
Base — February 2003
79619
79621
79620
79622
79623
Figure 76
Figure 77
Figure 78
Figure 79
Figure 80
- Unscrew securing screws (1) and remove sill board (2)
from both sides.
- Unscrew securing screws (2) and remove plastic
coverings (1) under instrument panel (the figure shows
one of coverings to be removed).
- Pull out door opening ring seal (4);
- pull out pressure plug (2) to access the screw underneath;
- unscrew securing screw (1);
- detach windscreen pillar covering (3) operating (from
both sides) according to the direction of the arrow.
- Unscrew securing screw (1) an detach rising grip handle
(2) from both sides.
- Operate on check tongues (
←) and pull out air diffusion
opening (1) from both sides.
79624
Figure 81
- Operate from instrument panel opening, release, from
check clamps, and detach piping (1) to deliver air to
diffusion openings.
E
URO
C
ARGO
T
ECTOR
12-26 t
38
BODY - CHASSIS
Base — February 2003
79625
79627
79626
78628
79629
79630
Figure 82
Figure 83
Figure 84
Figure 85
Figure 86
Figure 87
- Unscrew Body Control securing screws (1);
- remove Body Control (2) and set aside.
- Operate from (Body Control) opening, disconnect and
remove piping (1) to deliver air to diffusion openings.
- Unscrew side securing screws (1) from both sides of
instrument panel covering the body.
- Unscrew instrument panel covering securing screws (1)
in instrument board opening and screws (2) for fastening
to support bracket.
- Unscrew instrument panel covering (2) upper securing
screws (1) along windscreen edge perimeter.
- Operate from Body Control lower side and unscrew
securing nut (1), and set aside electric components
support panel (2) to access fastening underneath;
- unscrew screws (3) securing instrument panel covering to
support bracket.
E
URO
C
ARGO
T
ECTOR
12-26 t
BODY - CHASSIS
39
Base — February 2003
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст