KIA Ceed (2017 year). Instruction — part 12
Features of your vehicle
■ Right side
■ Left side
- parallel mode
-parallel mode
CAUTION
• Always drive slowly with the
brake pedal applied.
• If the parking space is to small
the system may be cancelled at
the Steering wheel control stage.
Do not park your vehicle if the
space is too small.
OJD045302L/OJD045303L
OUM044315L
■ Right side
■ Left side
5. Steering wheel control
- reverse mode
- reverse mode
• The above message will appear if the
shift lever is in R (Reverse). The steering
wheel will be controlled automatically.
• The system will be cancelled if you
firmly hold the steering wheel while it is
controlled automatically.
• The system will be cancelled if vehicle
speed is over 7km/h(4.3mph).
WARNING
OUM044304L/OUM044305L
Do not put your hands between the
4. Search complete
steering wheel while it is being
While driving forward to search for a
automatically controlled.
parking space, the above message will
appear with a beep sound if the search is
complete. Stop the vehicle and shift to
the R (Reverse) position.
4 112
Features of your vehicle
To cancel the system while parking
■ Manual transaxle
CAUTION
Press the Smart Parking Assist System
• Always drive slowly with the
button or turn the steering wheel to the
brake pedal applied.
left or right.
• Always check for objects around
your vehicle before driving.
• If the vehicle does not move even
though the brake pedal is not
depressed, check the surround-
ing before depressing the accel-
OUM044316L/OUM044317L
erator pedal. Be sure not to speed
■ Automatic transaxle
over 7km/h(4.3mph).
✽ NOTICE
• If you do not follow the instructions pro-
vided, you may fail to park your vehicle.
However, if the Parking Assist System
warning sound (distance from object
is within
30cm: continuous beep)
occurs, slowly drive the vehicle to the
OUM044318L/OUM044317L
reverse direction of the detected
Gear shift while steering wheel control
object after checking the surrounding.
When the above message appears with a
• Always check the surrounding before
beep sound, shift the gear and drive the
driving your vehicle if the Parking
Assist System warning sound
(dis-
vehicle with the brake pedal depressed.
tance from object is within 30cm: con-
tinuous beep) is heard for the object is
close to your vehicle.
4 113
Features of your vehicle
The system may be cancelled in the below
CAUTION
conditions:
Always check the surrounding
•
Ignoring the gear shift message and
before releasing the brake pedal.
drive the vehicle approximately 150cm
(59in).
•
The front and rear Parking Assist
System warning sound (distance from
WARNING
object is within
30cm: continuous
Always be careful while parking for
beep) is heard at the same time.
other vehicles or pedestrians.
•
6 minutes have passed since the vehi-
cle has been controlled by the Smart
Parking Assist System.
OJD045531L
•
The shift lever is changed to the P
6. Smart Parking Assist System com-
(Park) or R (Reverse) position while
pleted
searching for parking space.
Complete parking your vehicle according
to the instructions on the LCD display. If
required, manually control the steering
wheel and complete parking your vehicle.
✽ NOTICE
The brake pedal must be depressed by
the driver while parking your vehicle.
4 114
Features of your vehicle
How the system works
✽ NOTICE
(Exit mode)
•
Before activating the system check if
The Exit Mode operates in the below
the conditions are possible to use the
condition:
system.
•
For your safety, always apply the
• When vehicle speed is below 5 km/h
the first time after the engine has been
brake pedal except for when driving.
started.
• After parallel parking is completed with
the Smart Parking Assist System.
1. Activate the Smart Parking Assist
System
The shift lever should be placed in P
OJD042082
(Park) or N (Neutral).
1. Activate Smart Parking Assist
2. Select Exit Mode
System
3. Check surroundings
• Press the Smart Parking Assist
4. Steering wheel control
System button (the button indicator will
(1) Shift according to the instruction
illuminate).
on the LCD display.
• The Parking Assist System will be acti-
(2) Drive slowly with the brake pedal
vated (the button indicator will illumi-
applied.
nate).
5. Exiting complete
A warning sound will be heard if an
If necessary, manually adjust position
obstacle is detected.
of vehicle.
• Press the Smart Parking Assist
System button again for more than 2
seconds to turn off the system.
• The Smart Parking Assist System
defaults to the OFF position whenever
the ignition switch is turned on.
4 115
Features of your vehicle
■ Left side
■ Right side
■ Left side
■ Right side
✽ NOTICE
- Parallel exit
- Parallel exit
- Parallel exit
- Parallel exit
• When checking surroundings, if the
front or rear vehicle (or object) is too
near, the system may not work prop-
erly.
• The system may not operate normally
in the following conditions:
(1) When the sensors are frozen
(2) When the sensors are dirty
OUM044323L
OUM044324L
OUM044325L
OUM044326L
(3) When it snows or rains heavily
(4) When a pillar or object is near
2. Select Exit Mode
3. Check surroundings
• When exiting the parking space if an
• Select the mode by pressing the Smart
The Smart Parking Assist System checks
obstacle is detected that may cause an
Parking Assist System button with the
the front and rear space to exit the vehicle
accident, the system may cancel.
shift lever in P (Park) or N (Neutral)
from the parking space.
• If the space is too small to exit the sys-
and the brake pedal depressed.
tem may cancel.
• The left side parallel mode is selected
automatically when the Smart Parking
Assist System is activated.
CAUTION
• To select the right side parallel mode
• If searching surroundings is com-
press the Smart Parking Assist System
pleted, continue using the system
button once more.
after checking the surrounding
• If the button is pressed again, the sys-
area.
tem will turn off.
• The Exit mode may be activated
unintentionally, when the shift
lever is in P (Park) or N (Neutral) if
the Smart parking assist system
button is pressed.
4 116
Features of your vehicle
• The above message will appear if the
To cancel the system while exiting
shift lever is in D (Drive) or R (Reverse)
Press the Parking Assist System or
according to the distance of the front
Smart Parking Assist System button.
and rear object from the sensor.
The steering wheel will be controlled
CAUTION
automatically.
Always drive slowly with the brake
• The system will be cancelled if you
pedal applied.
firmly hold the steering wheel while it is
controlled automatically.
OUM044318L
• The system will be cancelled if vehicle
speed is over 7km/h (4.3mph).
WARNING
Do not put your hands between the
steering wheel while it is being
automatically controlled.
OUM044317L
OUM045315L
4. Steering wheel control
4 117
Features of your vehicle
CAUTION
•
When leaving the parking space
turn the steering wheel as much
as you can to the direction you
are leaving, and then drive the
vehicle slowly by depressing the
vehicle.
•
Always check the surrounding
before driving your vehicle if the
OUM044319L
Parking Assist System warning
sound is continuously heard.
OUM044328L
•
The system will be cancelled for
5. Exiting Complete
safety reasons if the vehicle is
When assisting the driver exit the parking
parked at a small space near a
wall.
space is completed the above message
will appear.
Turn the steering wheel to the direction
you are leaving and manually control the
OUM044320L
steering wheel while leaving the parking
space.
OUM044321L
Additional instructions(messages)
4 118
Features of your vehicle
When the Smart Parking Assist System
✽ NOTICE
is operating, a message may appear
• In the below conditions the system will be
regardless of the parking order.
cancelled. Park your vehicle manually.
The messages will appear according to
1. Search for parking space
the circumstances. Follow the instruc-
- When the ABS/ESC is activated
tions provided while parking your vehicle
- When the vehicle speed is over
with the Smart Parking Assist System.
30km/h(18.6mph)
- When you press the Smart Parking
Assist System button (the front and
rear Parking Assist System operates)
- When you shift the shift lever to R
(Reverse)
2. Steering wheel control
OJD045532L
- When the ABS/ESC is activated
System malfunction
- When the vehicle speed is over
• If there is a problem with the system,
7km/h (4.3 mph)
when the system is turned on, the
- When you press the Smart Parking
above message will appear. Also, the
Assist System button (the front and
indicator on the button will not light up
rear Parking Assist System operates)
and a beep sound will be heard 3 times.
- When you shift the shift lever to D
• If there is a problem with only the
(Drive) before entering the parking
Smart Parking Assist System, the
space
Parking Assist System will operate
- When you hold the steering wheel
after 2 seconds.
firmly
If you notice any problem, have your
vehicle checked by an authorized Kia
dealer as soon as possible.
4 119
Features of your vehicle
REARVIEW CAMERA (IF EQUIPPED)
HAZARD WARNING FLASHER
The rearview camera will activate when
the back-up light is ON with the ignition
switch ON and the shift lever in the R
(Reverse) position.
This system is a supplemental system
that shows behind the vehicle through
the navigation monitor while backing-up.
WARNING
• This system is a supplementary
OJD045086
function only. It is the responsibil-
ity of the driver to always check
OJD042089
Rear view display
the inside/outside rearview mirror
The hazard warning flasher should be
and the area behind the vehicle
used whenever you find it necessary to
before and while backing up
stop the vehicle in a hazardous location.
because there is a dead zone that
When you must make such an emer-
can't see through the camera.
gency stop, always pull off the road as far
• Always keep the camera lens
as possible.
clean. If lens is covered with for-
The hazard warning lights are turned on
eign matter, the camera may not
by pushing in the hazard switch. Both
operate normally.
turn signal lights will blink. The hazard
OJD042088
warning lights will operate even though
❈ The actual rear view in the vehicle may dif-
the key is not in the ignition switch.
❈ For more detailed informations, refer
fer from the illustration.
to supplement for navigation system.
To turn the hazard warning lights off,
push the switch again.
4 120
Features of your vehicle
LIGHTING
Battery saver function
Headlamp delay function
Headlight (Headlamp) welcome
•
The purpose of this feature is to pre-
(if equipped)
function (if equipped)
vent the battery from being dis-
The headlamps (and/or taillights) remain
When the headlight switch is in the ON or
charged. The system automatically
on for same minutes (Type A: 20 minutes,
AUTO position and all doors (and tail-
turns off the parking lights when the
Type B: 5 minutes) after the ignition key
gate) are closed and locked, if you press
driver removes the ignition key (Smart
is removed or turned to the ACC or
the door unlock button on the transmitter
key : turns off the engine) and opens
LOCK position. However, if the driver’s
or smart key, the headlights will come on
the driver- side door.
door is opened and closed, the head-
for about 15 seconds.
•
With this feature, the parking lights will
lights are turned off after 15 seconds.
If the headlight switch is in the AUTO
be turned off automatically if the driver
The headlights can be turned off by
position, the function can only operate at
parks on the side of road at night.
pressing the lock button on the transmit-
night.
If necessary, to keep the lights on
ter or smart key twice or turning off the
At this time, if you press the door unlock
when the ignition key is removed, per-
light switch from the headlight or Auto
button again or door lock button on the
form the following :
light position.
transmitter or smart key, the headlights
1) Open the driver-side door.
You can activate or deactivate the head-
will turn off immediately.
2) Turn the parking lights OFF and ON
lamp delay fuction. Refer to “User setting”
You can activate or deactivate the head-
again using the light switch on the
in this chapter.
lamp welcome fuction. Refer to “User set-
steering column.
ting” in this chapter.
CAUTION
If the driver gets out of the vehicle
✽ NOTICE
through other doors (except driver’s
There can be turned on front fog light
door), the battery saver function
and the fail light when you turn on the
does not operate and the headlamp
headlight switch ON. In this case we rec-
delay function does not turn off
ommend that you the system checked by
automatically. Therefore, it causes
an authorized Kia dealer.
the battery to be discharged. In this
case, make sure to turn off the lamp
before getting out of the vehicle.
4 121
Features of your vehicle
Static bending light (if equipped)
While driving the corner, for your sight
and safety, the static bending light turns
on automatically. The system will operate
automatically as follows:
•
When vehicle speed is under 10km/h
and steering wheel angle approximate-
ly 80 degrees.
•
When vehicle speed is over 10km/h
and steering wheel angle approximate-
ly 35 degrees.
•
When the vehicle is at a standstill.
OED040045
OED040046
•
When moving rearwards with one of
Lighting control
the above conditions satisfied the lights
Position light position (
)
will light up the opposite direction.
The light switch has a Headlight and a
When the light switch is in the position
Parking light position.
light position, the tail, position, license
To operate the lights, turn the knob at the
and instrument panel lights are ON.
end of the control lever to one of the fol-
lowing positions:
(1) OFF position
(2) Position light position
(3) Headlight position
(4) Auto light position (if equipped)
4 122
Features of your vehicle
CAUTION
•
Never place anything over the
sensor (1) located on the instru-
ment panel, this will ensure better
auto-light system control.
•
Do not clean the sensor using a
window cleaner, the cleaner may
leave a light film which could
interfere with sensor operation.
•
If your vehicle has window tint or
other types of coating on the
OED040800
OYN049201
front windshield, the Auto light
Auto light/AFLS position
system may not work properly.
Headlight position (
)
(if equipped)
When the light switch is in the headlight
position the head, tail, position, license
When the light switch is in the AUTO light
and instrument panel lights are ON.
position, the taillights and headlights will
be turned ON or OFF automatically
depending on the amount of light outside
✽ NOTICE
the vehicle.
The ignition switch must be in the ON
If your vehicle is equipped with the adap-
position to turn on the headlights.
tive front lighting system (AFLS), it will
also operate when the headlamp is ON.
4 123
Features of your vehicle
• The high-beam indicator will light when
the headlight high beams are switched
on.
• To prevent the battery from being dis-
charged, do not leave the lights on for
a prolonged time while the engine is
not running.
WARNING
Do not use high beam when there
are other vehicles. Using high
OED040801
beam could obstruct the other dri-
OED040802
ver's vision.
High - beam operation
Flashing headlights
Pull the lever towards you. It will return to
1. Turn the light switch to the headlight
position.
the normal position when released. The
headlight switch does not need to be on
2. Push the lever away from you.
to use this flashing feature.
4 124
Features of your vehicle
Operating condition
CAUTION
1. Place the light switch in the AUTO
The system may not operate normal-
position.
ly in the below conditions.
2. Turn on the high beam by pushing the
•
When the light from on-coming or
lever away from you.
front vehicle is not detected
The high beam assist indicator will illu-
because of lamp damage, hidden,
minate.
etc.
3. The High Beam Assist will turn on
•
When the lamp of the on-coming
when vehicle speed is above 45km/h.
or front vehicle is covered with
4. If the light switch is placed to the head-
dust, snow or water.
light position, the high beam assist will
•
When the light from on-coming or
OPS043238
turn off and the low beam will be on
front vehicle is not detected
constantly.
High Beam Assist (HBA)
because of exhaust fume, smoke,
(if equipped)
fog, snow, etc.
The high beam switches to low beam in
•
When the front window is covered
The high beam assist is a system that
the below conditions.
with foreign matters such as ice,
automatically adjusts headlamp range
- When headlight is detected from on-
dust, fog, or is damaged.
(switches between high beam and low
coming vehicle
beam) according to the brightness of
•
When there is a similar lamp with
- When tail light is detected from the
other vehicles and road conditions.
the front vehicle’s lamps
front vehicle.
•
When it is hard to see because of
- When streetlight or other light is
fog, heavy rain or snow.
detected.
- When the high beam assist turns off
- When vehicle speed is below 35km/h
4 125
Features of your vehicle
CAUTION
WARNING
•
When the headlamp is not
•
Do not place any accessories,
repaired or replaced at an author-
stickers or tint the windshield.
ized dealer.
•
Have the windshield glass
•
When the headlamp aiming is not
replaced from an authorized deal-
properly adjusted.
er.
•
When driving on a narrow curved
•
Do not remove or impact related
road or rough road.
parts of the high beam assist.
•
When driving downhill or uphill.
•
Be careful that water doesn’t get
•
When part of the vehicle in front
into the high beam assist unit.
is visible.
•
Do not place objects on the dash-
OED040804
•
When there is a traffic light,
board that reflects light such as
reflecting sign, flash sign or mir-
mirrors, white paper, etc. The sys-
Turn signals and lane change sig-
ror.
tem may malfunction if the sun-
nals
•
When the road conditions are bad
light is reflected.
The ignition switch must be on for the
such as being wet or covered
•
At times, the high beam assist
turn signals to function. To turn on the
with snow.
system may not work properly,
turn signals, move the lever up or down
•
When the front vehicle’s head-
always check the road conditions
(A). Green arrow indicators on the instru-
lights are off but the fog lights on.
for your safety. When the system
ment panel indicate which turn signal is
does not operate normally, manu-
operating.
•
When a suddenly appears from a
ally change the high beam and
They will self-cancel after a turn is com-
curve.
low beam.
pleted. If the indicator continues to flash
•
When the vehicle is tilted from a
after a turn, manually return the lever to
flat tire or being towed.
the OFF position.
To signal a lane change, move the turn
signal lever slightly and hold it in position
(B). The lever will return to the OFF posi-
tion when released.
4 126
Features of your vehicle
If an indicator stays on and does not
One-touch lane change function
flash or if it flashes abnormally, one of the
(if equipped)
turn signal bulbs may be burned out and
To activate an one-touch lane change
will require replacement.
function, move the turn signal lever
slightly and then release it. The lane
change signals will blink 3 times.
You can inactivate one-touch lane change
function in “Auto triple turn” of “User set-
ting”. Refer to “User setting” in chapter 4.
✽ NOTICE
If an indicator flash is abnormally quick
OYN049200
or slow, bulb may be burned out or have
a poor electrical connection in the circuit. Front fog light (if equipped)
Fog lights are used to provide improved
visibility when visibility is poor due to fog,
rain or snow, etc. The fog lights will turn
on when the fog light switch (1) is turned
on after the position light is turned on.
To turn off the fog lights, turn the fog light
switch (1) to the O (Off) position.
CAUTION
When in operation, the fog lights
consume large amounts of vehicle
electrical power. Only use the fog
lights when visibility is poor.
4 127
Features of your vehicle
■ Type A
Daytime running light
(if equipped)
Daytime Running Lights (DRL) can make
it easier for others to see the front of your
vehicle during the day. DRL can be help-
ful in many different driving conditions,
and it is especially helpful after dawn and
OED040806
before sunset.
■ Type B
The DRL system will turn off when:
Type A
• When headlight (Low beam) switch is
ON, DRL-LED system will be illuminat-
OJD042049
ing with lower intensity
Headlight leveling device
• The front fog light switch is ON.
(if equipped)
• The engine is OFF.
Manual type
OAM049046L
To adjust the headlight beam level
Type B
Rear fog light
according to the number of the passen-
• The headlight (low beam) switch is ON.
To turn the rear fog lights on, turn the
gers and the loading weight in the lug-
• The front fog light switch is ON.
rear fog light switch (1) to the on position
gage area, turn the beam leveling switch.
• The engine is OFF.
when the headlight is turned on.
Also, the rear fog lights turn on when the
rear fog light switch is turned on after the
front fog light switch
(if equipped) is
turned on and the headlight switch is in
the position light position.
To turn the rear fog lights off, turn the rear
fog light switch to the on position again.
Rear fog light is located only on the dri-
ver’s side (for wagon).
4 128
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст