KIA Ceed (2017 year). Instruction — part 13

Features of your vehicle

The higher the number of the switch is

Automatic type

positioned, the lower the headlight beam

It automatically adjusts the headlight

level. Always keep the headlight beam at

beam level according to the number of

the proper leveling position, or headlights

passengers and loading weight in the

may dazzle other road users.

luggage area.

Listed below are the examples of proper

And it offers proper headlight beam

switch settings. For loading conditions

under various conditions.

other than those listed below, adjust the

switch position so that the beam level

may be the nearest as the condition

WARNING

obtained according to the list.

If it does not work properly even

though your car is inclined back-

Loading condition

Switch position

OYN049201

ward according to passenger's

Driver only

posture, or the headlight beam is

Adaptive Front Lighting System

Driver + Front passenger

irradiated to the high or low posi-

(AFLS) (if equipped)

tion, we recommend that the sys-

Full passengers

Adaptive front lighting system uses the

tem be inspected by an authorized

(including driver)

steering angle and vehicle speed, to

Kia dealer.

Full passengers (including

keep your field of vision wide by swiveling

Do not attempt to inspect or

driver) + Maximum permis-

and leveling the headlamp.

replace the wiring yourself.

sible loading

Change the switch to the AUTO position

when the engine is running. The adaptive

Driver + Maximum permis-

front lighting system will operate when

sible loading

the headlamp is ON. To turn off the

AFLS, change the switch to other posi-

tions. After turning the AFLS off, head-

lamp swiveling no longer occurs, but lev-

eling operates continuously.

4 129

Features of your vehicle

OJD042090

If the AFLS malfunction indicator comes

on, the AFLS is not working properly.

Drive to the nearest safe location and

restart the engine. If the indicator contin-

uously remains on, we recommend that

the system be checked by an authorized

Kia dealer.

4 130

Features of your vehicle

WIPERS AND WASHERS

■ Front

A : Wiper speed control (front)

Windshield wipers (front)

· 2 - High wiper speed

Operates as follows when the ignition

· 1 - Low wiper speed

switch is turned ON.

· --- - Intermittent wipe

: For a single wiping cycle, move the

· AUTO* - Automatic control wipe

lever to this position and release it.

· O - Off

The wipers will operate continuously if

the lever is held in this position.

- Single wipe

O : Wiper is not in operation

B : Intermittent control wipe time

--- : Wiper operates intermittently at the

adjustment

same wiping intervals. Use this mode

in light rain or mist. To vary the speed

setting, turn the speed control knob.

C : Wash with brief wipes (front)*

1 : Normal wiper speed

■ Rear

D : Rear wiper/washer control*

2 : Fast wiper speed

- Continuous wipe

---

- Intermittent wipe

✽ NOTICE

· O

- Off

If there is heavy accumulation of snow

or ice on the windshield, defrost the

windshield for about

10 minutes, or

E : Wash with brief wipes (rear)*

until the snow and/or ice is removed

before using the windshield wipers to

* : if equipped

ensure proper operation. If you do not

remove the snow and/or ice before using

the wiper and wash-er, it may damage

the Wiper and washer system.

OXM049230L/OAM049048L

4 131

Features of your vehicle

To vary the speed setting, turn the speed

control knob (1).

CAUTION

If the wiper switch is set in AUTO mode

When washing the vehicle, set the

when the ignition switch is ON, the wiper

wiper switch in the off position to

will operate once to perform a self-check

stop the auto wiper operation.

of the system. Set the wiper to off posi-

The wiper may operate and be dam-

tion when the wiper is not in use.

aged if the switch is set in the AUTO

mode while washing the vehicle.

Do not remove the sensor cover

CAUTION

located on the upper end of the pas-

Rain sensor

When the ignition switch is ON and

senger side windshield glass.

the windshield wiper switch is

Damage to system parts could

placed in the AUTO mode, use cau-

OEL049900

occur and may not be covered by

tion in the following situations to

AUTO (Automatic) control

your vehicle warranty.

avoid any injury to the hands or

(if equipped)

When starting the vehicle in winter,

other parts of the body:

The rain sensor located on the upper end

set the wiper switch in the off posi-

• Do not touch the upper end of the

of the windshield glass senses the

tion. Otherwise, wipers may operate

windshield glass facing the rain

amount of rainfall and controls the wiping

and ice may damage the windshield

sensor.

cycle for the proper interval. The more it

wiper blades. Always remove all

• Do not wipe the upper end of the

rains, the faster the wiper operates. When

snow and ice and defrost the wind-

windshield glass with a damp or

the rain stops, the wiper stops.

shield properly prior to operating

wet cloth.

the windshield wipers.

• Do not put pressure on the wind-

shield glass.

4 132

Features of your vehicle

CAUTION

To prevent possible damage to the

•

To prevent possible damage to

washer pump, do not operate the

the wipers or windshield, do not

washer when the fluid reservoir is

operate the wipers when the

empty.

windshield is dry.

•

To prevent damage to the wiper

blades, do not use gasoline,

kerosene, paint thinner, or other

WARNING

solvents on or near them.

Do not use the washer in freezing

•

To prevent damage to the wiper

temperatures without first warming

arms and other components, do

the windshield with the defrosters;

OXM049048E

not attempt to move the wipers

the washer solution could freeze on

manually.

Windshield washers (front)

the windshield and obscure your

(if equipped)

vision.

In the O (Off) position, pull the lever gen-

tly toward you to spray washer fluid on

the windshield and to run the wipers 1-3

cycles.

Use this function when the windshield is

dirty.

The spray and wiper operation will con-

tinue until you release the lever.

If the washer does not work, check the

washer fluid level. If the fluid level is not

sufficient, you will need to add appropri-

ate non-abrasive windshield washer fluid

to the washer reservoir.

The reservoir filler neck is located in the

front of the engine compartment on the

passenger side.

4 133

Features of your vehicle

Headlight washer (if equipped)

If your vehicle is equipped with the head-

light washer it will operate at the same

time when you operate the windshield

washer. However, if this function is oper-

ated once, the headlight washer will not

operate within 15 minutes. It will operate

when the headlight is ON and the ignition

switch or engine start/stop button is in

the ON position.

The washer fluid will be sprayed on to the

headlights.

OXM049103E

OXM049125L

✽ NOTICE

Rear window wiper and washer

Push the lever away from you to spray

switch (if equipped)

rear washer fluid and to run the rear

• Check the headlight washers periodi-

wipers 1~3 cycles. The spray and wiper

cally to confirm that the washer fluid

The rear window wiper and washer

is being sprayed properly onto the

operation will continue until you release

switch is located at the end of the wiper

the lever.

headlight lenses.

and washer switch lever. Turn the switch

• The headlight washer can be operated

to desired position to operate the rear

15 minutes after being operated last

wiper and washer.

time.

- Normal wiper operation

---

- Intermittent wipe

O - Wiper is not in operation

4 134

Features of your vehicle

INTERIOR LIGHT

■ Type A

CAUTION

•

/DOOR (3) :

Do not use the interior lights for

- The map lamp comes on when a door

extended periods when the engine

is opened. If you close the door, the

is not running.

lamps go out after approximately 30

seconds.

It may cause battery discharge.

- The map lamp comes on for approxi-

mately 30 seconds when doors are

unlocked with a transmitter or smart

WARNING

key as long as the doors are not

Do not use the interior lights when

opened.

driving in the dark. Accidents could

OGD041104

- The map lamp will stay on for approxi-

happen because the view may be

■ Type B

mately 20 minutes if a door is opened

obscured by interior lights.

with the ignition switch in the ACC or

LOCK/OFF position.

Interior lamp AUTO cut

- The map lamp will stay on continu-

ously if the door is opened with the

• When all entrances are closed, if you

ignition switch in the ON position.

lock the vehicle by using the transmit-

- The map lamp will go out immediate-

ter or the smart key, all interior lamp

ly if the ignition switch is changed to

will be off after a few seconds.

the ON position or all doors are

• If you do not operate anything in the

locked.

vehicle after turning off the engine, the

OJD042091

•

/ON (4) : The map lamp stays on

lights will turn off after 20 minutes.

Map lamp

at all times.

Press the lens (1) to turn the map lamp

on or off

✽ NOTICE

•

/OFF (2) : The lamps are off even

When the lamp is turned on by pressing

if a door is opened.

the lens (1), the lamp does not turn off

even if the switch is in the OFF position

(2).

4 135

Features of your vehicle

■ Type A

Type B

Press the switch

to turn on the

room lamp.

Press the switch O to turn off the room

lamp.

OGDE041216

■ Type B

OLM049105

Vanity mirror lamp (if equipped)

Push the switch to turn the light on or off.

•

: The lamp will turn on if this button

is pressed.

•

: The lamp will turn off if this button

is pressed.

CAUTION

OGD041151

- Vanity mirror lamp

Room lamp

Always have the switch in the off

Type A

position when the vanity mirror

Press the button to turn the light on or off.

lamp is not in use. If the sunvisor is

If the map lamp turns on by the map

closed without the lamp off, it may

lamp switch, the room lamp will turn on.

discharge the battery or damage

the sunvisor.

4 136

Features of your vehicle

OJD042092

OJD042093

❈ The actual luggage room in the vehicle may

Glove box lamp

differ from the illustration.

The glove box lamp comes on when the

glove box is opened.

Luggage room lamp

The luggage room lamp comes on when

the tailgate is opened.

4 137

Features of your vehicle

WELCOME SYSTEM (IF EQUIPPED)

Headlamp welcome

Interior light

Puddle lamp (if equipped)

When the headlight(light switch in the

When the interior light switch is in the

When all doors are locked and closed,

headlight or AUTO position) is on and all

DOOR position and all doors (and tail-

the puddle lamp will come on for 15 sec-

doors

(and tailgate) are locked and

gate) are locked and closed, the room

onds if any of the below is performed.

closed, the headlight, position light and

lamp will come on for 30 seconds if any

• Without smart key system

tail light will come on for 15 seconds if

of the below is performed.