KIA Quoris (2018 year). Instruction — part 26
(Continued)
• The negative battery cable must
be removed first and installed last
when the battery is disconnected.
• In this case, have the system serv‐
iced by a professional workshop.
Kia recommends to visit an au‐
thorized Kia dealer/service part‐
ner.
CAUTION
• Keep the battery away from wa‐
ter or any liquid.
• Use parts for replacement from a
professional workshop. Kia recom‐
mends to visit an authorized Kia
dealer/service partner.
Reset items
Items should be reset after the battery
has been discharged or the battery has
been disconnected.
• Auto up/down window (see Chapter
• Sunroof (see Chapter 5, Features of
• Driver position memory system (see
Chapter 5, Features of your vehicle)
• Trip computer (see Chapter 5, Fea‐
• Climate control system (see Chapter
• Clock (see Chapter 5, Features of
• Audio (see Chapter 5, Features of
Maintenance
7-48
TIRES AND WHEELS
Tire care
For proper maintenance, safety, and
maximum fuel economy, you must al‐
ways maintain recommended tire infla‐
tion pressures and stay within the load
limits and weight distribution recom‐
mended for your vehicle.
Recommended cold tire inflation
pressures
All tire pressures (including the spare)
should be checked when the tires are
cold. Cold Tires means the vehicle has
not been driven for at least three hours
or driven less than 1.6 km .
Recommended pressures must be
maintained for the best ride, top vehi‐
cle handling, and minimum tire wear.
For recommended inflation pressure re‐
fer to Tire and wheels on page 8-07.
All specifications (sizes and pressures)
can be found on a label attached to the
vehicle.
WARNING
n Tire underinflation
Severe underinflation can lead to se‐
vere heat build-up, causing blow‐
outs, tread separation and other tire
failures that can result in the loss of
vehicle control leading to severe in‐
jury or death. This risk is much high‐
er on hot days and when driving for
long periods at high speeds.
CAUTION
• Underinflation also results in ex‐
cessive wear, poor handling and
reduced fuel economy. Wheel de‐
formation also is possible. Keep
your tire pressures at the proper
levels.
If a tire frequently needs refilling,
have the system checked by a pro‐
fessional workshop. Kia recom‐
mends to visit an authorized Kia
dealer/service partner.
• Overinflation produces a harsh
ride, excessive wear at the center
of the tire tread, and a greater
possibility of damage from road
hazards.
CAUTION
• Warm tires normally exceed rec‐
ommended cold tire pressures by
28 to 41 kPa. Do not release air
from warm tires to adjust the
pressure or the tires will be under‐
inflated.
(Continued)
7-49
7
Maintenance
(Continued)
• Be sure to reinstall the tire infla‐
tion valve caps. Without the valve
cap, dirt or moisture could get into
the valve core and cause air leak‐
age. If a valve cap is missing, in‐
stall a new one as soon as possi‐
ble.
WARNING
n Tire inflation
Overinflation or underinflation can
reduce tire life, adversely affect ve‐
hicle handling, and lead to sudden
tire failure. This could result in loss
of vehicle control and potential in‐
jury.
CAUTION
n Tire pressure
Always observe the following:
(Continued)
(Continued)
• Check tire pressure when the tires
are cold. (After vehicle has been
parked for at least three hours or
hasn't been driven more than
1.6 km since startup.)
• Check the pressure of your spare
tire each time you check the pres‐
sure of other tires.
• Never overload your vehicle. Be
careful not to overload a vehicle
luggage rack if your vehicle is
equipped with one.
• Worn, old tires can cause acci‐
dents. If your tread is badly worn,
or if your tires have been dam‐
aged, replace them.
Checking tire inflation pressure
Check your tires once a month or more.
Also, check the tire pressure of the
spare tire.
How to check
Use a good quality gauge to check tire
pressure. You can not tell if your tires
are properly inflated simply by looking
at them. Radial tires may look properly
inflated even when they're underinfla‐
ted.
Check the tire's inflation pressure when
the tires are cold. - "Cold" means your
vehicle has been sitting for at least
three hours or driven no more than
1.6 km (1 mile).
Remove the valve cap from the tire
valve stem. Press the tire gauge firmly
onto the valve to get a pressure meas‐
urement. If the cold tire inflation pres‐
sure matches the recommended pres‐
sure on the tire and loading information
label, no further adjustment is necessa‐
ry. If the pressure is low, add air until
you reach the recommended amount.
If you overfill the tire, release air by
pushing on the metal stem in the cen‐
ter of the tire valve. Recheck the tire
pressure with the tire gauge. Be sure to
put the valve caps back on the valve
stems. They help prevent leaks by
keeping out dirt and moisture.
WARNING
• Inspect your tires frequently for
proper inflation as well as wear
and damage. Always use a tire
pressure gauge.
(Continued)
Maintenance
7-50
(Continued)
• Tires with too much or too little
pressure wear unevenly causing
poor handling, loss of vehicle con‐
trol, and sudden tire failure leading
to accidents, injuries, and even
death. The recommended cold tire
pressure for your vehicle can be
found in this manual and on the
tire label located on the driver's
side center pillar.
• Worn tires can cause accidents.
Replace tires that are worn, show
uneven wear, or are damaged.
• Remember to check the pressure
of your spare tire. Kia recom‐
mends that you check the spare
every time you check the pressure
of the other tires on your vehicle.
Tire rotation
To equalize tread wear, it is recommen‐
ded that the tires be rotated every
12,000 km (7,500 miles) or sooner if ir‐
regular wear develops.
During rotation, check the tires for cor‐
rect balance.
When rotating tires, check for uneven
wear and damage. Abnormal wear is
usually caused by incorrect tire pres‐
sure, improper wheel alignment, out-
of-balance wheels, severe braking or
severe cornering. Look for bumps or
bulges in the tread or side of tire. Re‐
place the tire if you find either of these
conditions. Replace the tire if fabric or
cord is visible. After rotation, be sure to
bring the front and rear tire pressures
to specification and check lug nut tight‐
ness.
Refer to Tire and wheels on page
7-51
7
Maintenance
Disc brake pads should be inspected for
wear whenever tires are rotated.
NOTICE
Rotate radial tires that have an
asymmetric tread pattern only from
front to rear and not from right to
left.
WARNING
• Do not use the compact spare tire
for tire rotation.
• Do not mix bias ply and radial ply
tires under any circumstances.
This may cause unusual handling
characteristics that could result in
death, severe injury, or property
damage.
Wheel alignment and tire
balance
The wheels on your vehicle were
aligned and balanced carefully at the
factory to give you the longest tire life
and best overall performance.
In most cases, you will not need to have
your wheels aligned again. However, if
you notice unusual tire wear or your
vehicle pulling one way or the other,
the alignment may need to be reset.
If you notice your vehicle vibrating
when driving on a smooth road, your
wheels may need to be rebalanced.
CAUTION
Improper wheel weights can damage
your vehicle's aluminum wheels. Use
only approved wheel weights.
Tire replacement
If the tire is worn evenly, a tread wear
indicator will appear as a solid band
across the tread. This shows there is
less than 1.6 mm of tread left on the
tire. Replace the tire when this hap‐
pens.
Do not wait for the band to appear
across the entire tread before replacing
the tire.
Maintenance
7-52
NOTICE
We recommend that when replacing
tires, use the same originally sup‐
plied with the vehicles.
If not, that affects driving perform‐
ance.
CAUTION
When replacing the tires, recheck
and tighten the wheel nuts after
driving about 1,000 km If the steer‐
ing wheel shakes or the vehicle vi‐
brates while driving, the tire is out of
balance. Align the tire balance. If the
problem is not solved, contact a pro‐
fessional workshop. Kia recommends
to visit an authorized Kia dealer/
service partner.
WARNING
n Replacing tires
To reduce the chance of serious or
fatal injuries from an accident
(Continued)
(Continued)
caused by tire failure or loss of vehi‐
cle control:
• Replace tires that are worn, show
uneven wear, or are damaged.
Worn tires can cause loss of brak‐
ing effectiveness, steering control,
and traction.
• Do not drive your vehicle with too
little or too much pressure in your
tires. This can lead to uneven wear
and tire failure.
• When replacing tires, never mix ra‐
dial and bias-ply tires on the same
car. You must replace all tires (in‐
cluding the spare) if moving from
radial to bias-ply tires.
• Using tires and wheels other than
the recommended sizes could
cause unusual handling character‐
istics and poor vehicle control, re‐
sulting in a serious accident.
• Wheels that do not meet Kia’s
specifications may fit poorly and
result in damage to the vehicle or
unusual handling and poor vehicle
control.
(Continued)
(Continued)
• The ABS works by comparing the
speed of the wheels. The tire size
affects wheel speed. When replac‐
ing tires, all 4 tires must use the
same size originally supplied with
the vehicle. Using tires of a differ‐
ent size can cause the ABS (Anti-
lock Brake System) and ESC (Elec‐
tronic Stability Control) to work ir‐
regularly.
Wheel replacement
When replacing the metal wheels for
any reason, make sure the new wheels
are equivalent to the original factory
units in diameter, rim width and offset.
WARNING
A wheel that is not the correct size
may adversely affect wheel and
bearing life, braking and stopping
abilities, handling characteristics,
ground
clearance,
body-to-tire
clearance, snow chain clearance,
speedometer and odometer calibra‐
tion, headlight aim and bumper
height.
7-53
7
Maintenance
Tire traction
Tire traction can be reduced if you drive
on worn tires, tires that are improperly
inflated or on slippery road surfaces.
Tires should be replaced when tread
wear indicators appear. Slow down
whenever there is rain, snow or ice on
the road to reduce the possibility of
losing control of the vehicle.
Tire maintenance
In addition to proper inflation, correct
wheel alignment helps to decrease tire
wear. If you find a tire is worn uneven‐
ly, have a professional workshop check
the wheel alignment. Kia recommends
to visit an authorized Kia dealer/service
partner.
When you have new tires installed,
make sure they are balanced. This will
increase vehicle ride comfort and tire
life. Additionally, a tire should always
be rebalanced if it is removed from the
wheel.
Tire sidewall labeling
This information identifies and de‐
scribes the fundamental characteristics
of the tire and also provides the tire
identification number (TIN) for safety
standard certification. The TIN can be
used to identify the tire in case of a re‐
call.
1. Manufacturer or brand name
Manufacturer or Brand name is shown.
2. Tire size designation
A tire’s sidewall is marked with a tire
size designation. You will need this in‐
formation when selecting replacement
tires for your car. The following ex‐
plains what the letters and numbers in
the tire size designation mean.
Example tire size designation:
(These numbers are provided as an ex‐
ample only; your tire size designator
could vary depending on your vehicle.)
245/50R18 100V
245 -
Tire width in millimeters.
50 - Aspect ratio. The tire’s section
height as a percentage of its
width.
R -
Tire construction code (Radial).
18 - Rim diameter in inches.
100 -
Load Index, a numerical code
associated with the maximum
load the tire can carry.
V -
Speed Rating Symbol. See the
speed rating chart in this sec‐
tion for additional information.
Maintenance
7-54
Wheel size designation
Wheels are also marked with important
information that you need if you ever
have to replace one. The following ex‐
plains what the letters and numbers in
the wheel size designation mean.
Example
wheel
size
designation:
7.5JX18
7.5 - Rim width in inches.
J -
Rim contour designation.
18 -
Rim diameter in inches.
Tire speed ratings
The chart below lists many of the dif‐
ferent speed ratings currently being
used for passenger car tires. The speed
rating is part of the tire size designa‐
tion on the sidewall of the tire. This
symbol corresponds to that tire's de‐
signed maximum safe operating speed.
Speed
Rating
Symbol
Maximum Speed
S
180 km/h (112 mph)
T
190 km/h (118 mph)
H
210 km/h (130 mph)
V
240 km/h (149 mph)
Z
Above 240 km/h (149
mph)
3. Checking tire life (TIN: Tire
Identification Number)
Any tires that are over 6 years old,
based on the manufacturing date, (in‐
cluding the spare tire) should be re‐
placed by new ones. You can find the
manufacturing date on the tire sidewall
(possibly on the inside of the wheel),
displaying the DOT Code. The DOT Code
is a series of numbers on a tire consist‐
ing of numbers and English letters. The
manufacturing date is designated by
the last four digits (characters) of the
DOT code.
DOT : XXXX XXXX OOOO
The front part of the DOT means a
plant code number, tire size and tread
pattern and the last four numbers indi‐
cate week and year manufactured.
For example:
DOT XXXX XXXX 1617 represents that
the tire was produced in the 16th week
of 2017.
WARNING
n Tire age
(Continued)
(Continued)
Tires degrade over time, even when
they are not being used.
Regardless of the remaining tread, it
is recommended that tires generally
be replaced after six (6) years of
normal service. Heat caused by hot
climates or frequent high loading
conditions can accelerate the aging
process. Failure to follow this warn‐
ing can result in sudden tire failure,
which could lead to a loss of control
and an accident involving serious in‐
jury or death.
4. Tire ply composition and material
The number of layers or plies of rub‐
ber-coated fabric are in the tire. Tire
manufacturers also must indicate the
materials in the tire, which include
steel, nylon, polyester, and others. The
letter "R" means radial ply construction;
the letter "D" means diagonal or bias
ply construction; and the letter "B"
means belted-bias ply construction.
7-55
7
Maintenance
5. Maximum permissible inflation
pressure
This number is the greatest amount of
air pressure that should be put in the
tire. Do not exceed the maximum per‐
missible inflation pressure. Refer to the
Tire and Loading Information label on
page 8-16 for recommended inflation
pressure.
6. Maximum load rating
This number indicates the maximum
load in kilograms and pounds that can
be carried by the tire. When replacing
the tires on the vehicle, always use a
tire that has the same load rating as
the factory installed tire.
7. Uniform tire quality grading
Quality grades can be found where ap‐
plicable on the tire sidewall between
tread shoulder and maximum chapter
width.
For example:
TREADWEAR 200
TRACTION AA
TEMPERATURE A
Tread wear
The tread wear grade is a comparative
rating based on the wear rate of the
tire when tested under controlled con‐
ditions on a specified government test
course. For example, a tire graded 150
would wear one-and-a-half times (1½)
as well on the government course as a
tire graded 100.
The relative performance of tires de‐
pends upon the actual conditions of
their use, however, and may depart sig‐
nificantly from the norm because of
variations in driving habits, service
practices and differences in road char‐
acteristics and climate.
These grades are molded on the side-
walls of passenger vehicle tires. The
tires available as standard or optional
equipment on your vehicles may vary
with respect to grade.
Traction - AA, A, B & C
The traction grades, from highest to
lowest, are AA, A, B and C. Those
grades represent the tires ability to
stop on wet pavement as measured
under controlled conditions on specified
government test surfaces of asphalt
and concrete. A tire marked C may have
poor traction performance.
WARNING
The traction grade assigned to this
tire is based on straight-ahead brak‐
ing traction tests, and does not in‐
clude acceleration, cornering, hydro‐
planing, or peak traction characteris‐
tics.
Temperature - A, B & C
The temperature grades are A (the
highest), B and C representing the tire’s
resistance to the generation of heat
and its ability to dissipate heat when
tested under controlled conditions on a
specified indoor laboratory test wheel.
Sustained high temperature can cause
the material of the tire to degenerate
and reduce tire life, and excessive tem‐
perature can lead to sudden tire failure.
Grades B and A represent higher levels
of performance on the laboratory test
wheel than the minimum required by
the law.
WARNING
n Tire temperature
(Continued)
Maintenance
7-56
(Continued)
The temperature grade for this tire
is established for a tire that is prop‐
erly inflated and not overloaded. Ex‐
cessive speed, underinflation, or ex‐
cessive loading, either separately or
in combination, can cause heat build-
up and possible sudden tire failure.
This can cause loss of vehicle control
and serious injury or death.
Low aspect ratio tire (if
equipped)
Low aspect ratio tires, whose aspect
ratio is lower than 50, are provided for
sporty looks.
Because the low aspect ratio tires are
optimized for handling and braking, it
may be more uncomfortable to ride in
and there is more noise compare with
normal tires.
CAUTION
Because the sidewall of the low as‐
pect ratio tire is shorter than the
normal, the wheel and tire of the
low aspect ratio tire is easier to be
(Continued)
(Continued)
damaged. So, follow the instructions
below.
- When driving on a rough road or
off road, drive cautiously because
tires and wheels may be damaged.
And after driving, inspect tires and
wheels.
- When passing over a pothole,
speed bump, manhole or curb
stone, drive slowly so that the
tires and wheels are not damaged.
- If the tire is impacted, inspect the
tire condition or contact a profes‐
sional workshop. Kia recommends
to visit an authorized Kia dealer/
service partner.
- To prevent damage to the tire, in‐
spect the tire condition and pres‐
sure every 3,000 km.
CAUTION
• It is not easy to recognize the tire
damage with your own eyes. But if
there is the slightest hint of tire
damage, even though you cannot
see the tire damage with your own
eyes, have the tire checked or re‐
placed because the tire damage
may cause air leakage from the
tire.
• If the tire is damaged by driving on
a rough road, off road, pothole,
manhole, or curb stone, it will not
be covered by the warranty.
• You can find out the tire informa‐
tion on the tire sidewall.
7-57
7
Maintenance
FUSES
A vehicle’s electrical system is protec‐
ted from electrical overload damage by
fuses.
This vehicle has 2 fuse panels, one loca‐
ted in the driver’s side panel bolster,
another is in the engine compartment.
If any of your vehicle’s lights, accesso‐
ries, or controls do not work, check the
appropriate circuit fuse. If a fuse has
blown, the element inside the fuse will
be melted.
If the electrical system does not work,
first check the driver’s side fuse panel.
Before replacing a blown fuse, discon‐
nect the negative battery cable.
Always replace a blown fuse with one
of the same rating.
If the replacement fuse blows, this indi‐
cates an electrical problem. Avoid using
the system involved and immediately
consult a professional workshop. Kia
recommends to consult an authorized
Kia dealer/service partner.
Maintenance
7-58
Three kinds of fuses are used: blade
type for lower amperage rating, car‐
tridge type, and fusible link for higher
amperage ratings.
WARNING
n Fuse replacement
• Never replace a fuse with anything
but another fuse of the same rat‐
ing.
• A higher capacity fuse could cause
damage and possibly a fire.
• Never install a wire or aluminum
foil instead of the proper fuse
even as a temporary repair. It may
cause extensive wiring damage
and a possible fire.
• Do not arbitrarily modify or add-
on electric wiring of the vehicle.
CAUTION
Do not use a screwdriver or any oth‐
er metal object to remove fuses be‐
cause it may cause a short circuit
and damage the system.
NOTICE
The actual fuse/relay panel label
may differ from equipped items.
CAUTION
• When replacing a blown fuse or re‐
lay with a new one, make sure the
new fuse or relay fits tightly into
the clips. The incomplete fastening
fuse or relay may cause the vehi‐
cle wiring and electric systems
damage and a possible fire.
• Do not remove fuses, relays and
terminals fastened with bolts or
nuts. The fuses, relays and termi‐
nals may be fastened incomplete‐
ly, and it may cause a possible fire.
If fuses, relays and terminals fas‐
tened with bolts or nuts are blown,
consult a professional workshop.
Kia recommends to consult an au‐
thorized Kia dealer/service part‐
ner.
(Continued)
(Continued)
• Do not input any other objects ex‐
cept fuses or relays into fuse/relay
terminals such as a driver or wir‐
ing. It may cause contact failure
and system malfunction.
• Do not plug in screwdrivers or af‐
termarket wiring into the terminal
originally designed for fuse and re‐
lays only. The electrical system
and wiring of the vehicle interior
may be damaged or burned due to
contact failure.
Instrument panel fuse
replacement
7-59
7
Maintenance
1. Turn the Engine Start/Stop button
and all other switches off.
2. Open the fuse panel cover.
3. Pull the suspected fuse straight
out. Use the removal tool provided
in the engine compartment fuse
panel.
4. Check the removed fuse; replace it
if it is blown.
5. Push in a new fuse of the same
rating, and make sure it fits tightly
in the clips.
If it fits loosely, consult a professional
workshop. Kia recommends to consult
an authorized Kia dealer/service part‐
ner.
If you do not have a spare, use a fuse
of the same rating from a circuit you
may not need for operating the vehicle,
such as the cigarette lighter fuse.
If the headlights or other electrical
components do not work and the fuses
are OK, check the fuse panel in the en‐
gine compartment. If a fuse is blown, it
must be replaced.
Fuse switch
Always, put the fuse switch at the ON
position.
If you move the switch to the OFF posi‐
tion, some items such as audio and dig‐
ital clock must be reset and transmitter
(or smart key) may not work properly.
CAUTION
• Always place the fuse switch in
the ON position while driving the
vehicle.
• Do not move the transportation
fuse switch repeatedly. The fuse
switch may be worn out.
• Place fuse switch in the "OFF" po‐
sition to discharge the battery in
case of parking the vehicle more
than a month.
Maintenance
7-60
Engine compartment fuse
replacement
1. Turn the Engine Start/Stop button
and all other switches off.
2. Remove the fuse panel cover by
pressing the tab and pulling the
cover up. When the blade type fuse
is disconnected, remove it by using
the clip designed for changing fuses
located in the engine room fuse
box. Upon removal, securely insert
reserve fuse of equal quantity.
3. Check the removed fuse; replace it
if it is blown. To remove or insert
the fuse, use the fuse puller in the
engine compartment fuse panel.
4. Push in a new fuse of the same
rating, and make sure it fits tightly
in the clips.
If it fits loosely, consult a professio‐
nal workshop. Kia recommends to
consult an authorized Kia dealer/
service partner.
CAUTION
After checking the fuse panel in the
engine compartment, securely install
the fuse panel cover. If not, electrical
failures may occur from water con‐
tact.
Main fuse
If the main fuse is blown, it must be re‐
moved as follows:
1. Turn off the engine.
2. Disconnect the negative battery
cable.
3. Remove the nuts shown in the pic‐
ture above.
4. Replace the fuse with a new one of
the same rating.
5. Reinstall in the reverse order of re‐
moval.
7-61
7
Maintenance
CAUTION
Visually inspect the battery cap for
secure closing. If the battery cap is
not securely latched, the electrical
system may be damaged to due in‐
flux of moisture into the system.
Multi fuse
If the multi fuse is blown, it must be re‐
moved as follows:
1. Disassemble the negative cable of
battery.
2. Remove the nuts shown in the pic‐
ture above.
3. Replace the fuse with a new one of
the same rating.
4. Reinstall in the reverse order of re‐
moval.
NOTICE
If the multi fuse is blown, consult a
professional workshop. Kia recom‐
mends to consult an authorized Kia
dealer/service partner.
Fuse/relay panel description
Inside the fuse/relay panel covers, you
can find the fuse/relay label describing
fuse/relay name and capacity.
NOTICE
Not all fuse panel descriptions in this
manual may be applicable to your
vehicle. It is accurate at the time of
printing. When you inspect the fuse
panel in your vehicle, refer to the
fuse panel label.
Instrument panel fuse panel
Maintenance
7-62
Fuse Name
Symbol
Fuse rating
Circuit Protected
AUDIO 2
10A
A/V & Navigation Head Unit
7-63
7
Maintenance
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст