KIA Venga (2016 year). Instruction — part 12
YN ENG 4(104~AUDIO).QXP
9/5/2016
4:29 PM Page 122
Features of your vehicle
List Function
The total number of files and folders that
With this function you can navigate
can be searched is limited to a pre-
through all tracks in the iPOD file sys-
defined value
tem.
The Maximum number of files is
✎ The main menu of the LIST function
7999.
consists of:
The Maximum number of folders is
✎ PLAYLIST, ARTIST, ALBUM,
2000.
GENRE, SONG and COMPOSER.
The Maximum number of folders and
Short press the OK button to enter the
number of files is 9999.
selected category or the sub-category.
Extra files and folders will be ignored.
Short press the button to go to the
previous category.
OYN046094
Short press
or
button to navi-
gate through the list of the selected
Notes on USB
category.
Due to constant changes of USB prod-
The songs in the selected play-list will
ucts in the market and their respective
be displayed.
Software, it can be possible that some of
Artist: a list of albums of the selected
the USB devices are not compatible with
artist will displayed, the user can then
this Head Unit.
select an album from this list to view
The following file formats are supported:
the songs in the album selected.
MP3 (MPEG 1 Layer 3)
Album: the songs in the selected
WMA (Windows Media Audio)
album will be displayed.
The files must have the correspon-
Genre: the list of artists for the select-
ding file extension “.mp3” or “.wma” to
ed Genre will be displayed. After the
be played.
selection of an artist, a list of albums
for this artist is displayed. The user
can now select an album in this list to
view the songs in the selected album.
Song: all songs in the album will be
displayed in order.
4 122
YN ENG 4(104~AUDIO).QXP
9/5/2016
4:29 PM Page 123
Features of your vehicle
Notes on USB Sticks (Thumb drives)
Inserting and removing an USB stick
✽ NOTICE
Only use USB sticks (thumb drives) of
(thumb drive)
•
In rare cases it is possible that an USB
wellknown manufacturers. The use of
Insert the USB stick into the USB hub
stick (thumb drive) is not recognized
other drives may result in malfunction of
The USB hub is located in the con-
by the unit or may cause a malfunc-
the set.
sole (also see Car Manual).
tion.
Do not connect other USB devices such
✎ Please keep lid closed when not in
•
This is not a system fault. Some USB
as hard discs or other digital equipment
use.
sticks do not comply with the USB
to the USB hub. Connecting other
thumb drive specifications.
devices can cause malfunction or even
Playback of files
destroy the audio equipment.
✎ Playback starts automatically, in case
CAUTION
there are MP3 or WMA files on the
USB stick,
•
We strongly recommend only
CAUTION
using USB sticks (thumb drives)
OR
• The USB hub is designed for a
of well-known manufacturers.
When the device is inserted but a dif-
charge and supply current of up
•
On no account must other USB
ferent source was selected before,
to 500 mA.
devices such as hard discs or
press the AUX button to start play-
• When using external equipment
other digital equipment be con-
back.
with a current consumption
nected to the USB hub.
exceeding the specified 500 mA,
•
Connecting other devices can
Previous/Next Folder
the unit switches off the USB hub
cause malfunction or even
and gives a warning.
Press the or buttons to select
destroy the audio equipment.
previous or next folder.
Previous/Next File
Press the or buttons to select
previous or next song file
4 123
YN ENG 4(104~AUDIO).QXP
9/5/2016
4:29 PM Page 124
Features of your vehicle
Manual Seek - Fast Forward/Fast back-
Random Folder/All Files
Viewing MP3 Information
ward
Short press the RDM button to acti-
With this function text information of the
Press and hold the or button to
vate the “Random Folder” option.
MP3 files can displayed on the LCD-
go fast forward or fast backward.
All files in the folder will be played at
Display.
During manual seek audio is audible
random.
Short press the press INFO button.
at reduced volume.
OR
The following information will be shown
Long press the RDM button to acti-
in the following sequence.
Repeat File/Folder
vate the “Random All” option.
Filename (“NO INFO” will appear if
Short press the RPT button to select
All files on the USB device will be
the file name contains characters that
Repeat File.
played at random.
do not pertain to the ASCII character
set)
The current file will be repeated.
To deactivate the “Random Folder/All
Long press the RPT button to select
Files” feature, press the RDM button
ID3 tag info - Song Title (“NO INFO”
again.
will appear if there is no Song Title
Repeat Folder.
available)
All files within the current folder will be
ID3 tag info - Artist name (“NO INFO”
repeated.
Scan File/Folder
will appear if there is no Artist Name
To cancel the “Repeat File/Folder”
Long press the SCAN button to acti-
available)
mode, short press the RPT button
vate the “Scan Folder” option.
ID3 tag info - Album name (“NO
again.
✎ The first track of each folder will be
INFO” will appear if will appear if there
scanned, except the root directory.
is no Album Name available).
OR
Directory name
Short press the SCAN button to acti-
Total no. of files on the USB device
vate the “Scan All” option.
The information will be visible on the
All files on the USB device will be
LCD-display for 5 seconds.
scanned.
To deactivate the “Scan Folder/All
Files” feature, short press the SCAN
button again to abort “Scan All”
4 124
YN ENG 4(104~AUDIO).QXP
9/5/2016
4:29 PM Page 125
Features of your vehicle
Auxiliary In
✽ NOTICE
Via the Auxiliary Input (3.5 mm plug)
The AUX source is not available if an
you can connect your portable device
iPod® is connected.
to the Head Unit.
The volume setting of Auxiliary source
Insert the 3.5 mm plug (connected to
is independent of other sources.
your portable device) into the Aux
Any volume changes in Auxiliary source
input.
is memorized and used whenever the
✎ Audio output from the auxiliary source
Auxiliary source is selected.
is directly audible when the device is
plugged in.
✎ The Auxiliary Source is aborted when
another source becomes active.
To re-select the Auxiliary Source
when it is plugged in already:
Short press the AUX button on the
Head Unit.
OR
Short press the Mode button on the
Steering Wheel Remote Control.
✎ If no Auxiliary Source is detected,
“NO MEDIA” will be displayed for 5
seconds and the Head Unit will return
to the previous selected source.
4 125
YN ENG 4(104~AUDIO).QXP
9/5/2016
4:29 PM Page 126
Features of your vehicle
Bluetooth® Wireless Technology
Hands-Free Profile (HFP)
Pairing
This is commonly used to allow car
To pair your Bluetooth® Wireless
You can use a Bluetooth® Wireless
handsfree kits to communicate with
Technology-enabled device to this Head
Technology device in your car to make a
mobile phones in the car.
Unit, make sure that no device is current-
hands-free phone call or to stream music
onto your in-car speakers (via this Head
ly streaming to this Head Unit first.
Unit). This Head Unit supports HFP,
Notes for mobile phones
Short press the SETUP button to
A2DP and AVRCP connection.
enter the Setup menu.
Some functions (e.g. starting of speech
recognition) are not supported by all
Short press the or button to
Advanced Audio Distribution Profile
mobile phones. We cannot guarantee
access the Bluetooth® Wireless
(A2DP)
that all functions described will be sup-
Technology sub-menu.
This profile defines how high quality
ported by all mobile phones with
Now select “New Device”.
audio (stereo or mono) can be streamed
Bluetooth® Wireless Technology.
Press the or button to select
from one device to another over a
the number of the first digit.
Bluetooth® Wireless Technology connec-
New device
Press the or button to select the
tion. For example: music streamed from a
This function allows you to add a new
next digit.
mobile phone to a wireless headset or
phone to the Head Units Bluetooth®
Repeat the above steps for the other
car audio.
Wireless Technology Device List.
three digits.
Maximum of 5 devices can be added to
Press the OK button to confirm the 4-
Audio/Video Remote Control Profile
the list. If the list is full, the oldest device
digit PIN for authentication and acti-
(AVRCP)
will be replaced by the newly added
vate the “Discoverable Mode”.
Bluetooth® Wireless Technology device,
This profile is designed to provide a stan-
In “Discoverable Mode” the Head Unit
dard interface to control TVs, Hi-fi equip-
based on last pairing date.
broadcasts a Bluetooth® Wireless
ment, etc. to allow a single remote con-
Technology ID.
trol (or other device) to control all of the
Look for the “Kia-BLUETOOTH” on
A/V equipment to which a user has
your Bluetooth® Wireless Technology
access. It may be used in concert with
device.
Advanced Audio Distribution Profile.
Enter identically the same PIN in your
Bluetooth® Wireless Technology
device and authenticate pairing on
your Bluetooth® Wireless Technology
device.
4 126
YN ENG 4(104~AUDIO).QXP
9/5/2016
4:29 PM Page 127
Features of your vehicle
When pairing is established, the ID of
Delete Device
Answering a Call
the Bluetooth® Wireless Technology
This function allows you to delete a
Press the Call button on the Steering
device and the service list info will be
Bluetooth® Wireless Technology device
Wheel Remote Control to accept an
stored in the Head Unit Bluetooth®
ID from the Head Unit Bluetooth®
incoming call.
Wireless Technology Device List.
Wireless Technology Device List.
Short press the SETUP button to
Terminate / Reject Call
Device List
enter the Setup menu.
Press the End Call button on the
With this function you can browse
Short press the or button to
Steering Wheel Remote Control to
through and select Bluetooth® Wireless
access the Bluetooth® Wireless
terminate or reject a call.
Technology devices that are stored in the
Technology sub-menu.
Head Unit Bluetooth® Wireless
Press the button to select Delete
Last Call Re-dial
Technology Device List.
Device.
Short press the Call button on the
Short press the SETUP button to enter
Press the OK button to delete the
Steering Wheel Remote Control to re-
the Setup menu.
selected device from the Head Unit
dial last dialled number (one attempt).
Short press the or button to
Bluetooth® Wireless Technology
Long press the Call button on the
access the Bluetooth® Wireless
Device List
Steering Wheel Remote Control to re-
Technology sub-menu.
dial last dialled number
(two
Press the button to browse the
Phone Volume
attempts).
Device List to select the required
Short press the SETUP button to
device.
enter the Setup menu.
Private Call
Press the OK button to start pairing
Short press the or button to
This function allows you to have a private
between the selected device and the
access the Bluetooth® Wireless
call even if the phone is connected to the
Head Unit.
Technology sub-menu.
Head Unit.
✎ Note: Whenever there is at least one
Select the option “Phone Volume”.
Press the Call button on your phone
connected device active, in the display
Press the or button to decrease
to start a private call.
the Bluetooth® Wireless Technology
or increase the phone volume setting.
OR
icon is visible.
Default setting: 12
Press the End Call button on your
Setting range: 0 ... 35
phone to end a private call.
During an ongoing call, user is
allowed to adjust the BT Phone vol-
ume. The adjusted volume is memo-
rized into Phone Volume setting.
4
127
YN ENG 4(104~AUDIO).QXP
9/5/2016
4:29 PM Page 128
Features of your vehicle
Transferring a Call
Next/Previous Track
This function allows you to transfer a call
This function allows you to select the
during an ongoing call.
next/ previous track of phone‘s music
From the tuner to the phone
player by using the next/previous track
buttons on the Head Unit or Steering
From the phone to the tuner
Wheel Remote Control.
Long press the Call button on the
Short press the or button on the
Steering Wheel Remote Control to
Head Unit or the Steering Wheel
transfer the ongoing call back to the
phone or back to the tuner again.
Remote Control.
Suspend Audio Streaming
Audio Streaming
This function allows you to suspend
Start Audio Streaming
streaming music from the phone to the
This function allows the Head Unit to
Head Unit.
start streaming music from phone.
Short press the Mute button on the
The Bluetooth® Wireless Technology
Steering Wheel Remote Control.
device must be connected with the
Press the AUX button and de-select
Head Unit.
BT AUDIO.
Press the AUX button and select BT
AUDIO.
✎ The Head Unit starts streaming the
audio from the phone and will start
playing the audio files.
✎ The Head Unit has no control on the
sequence of track playback in phone.
4 128
YN ENG 4(104~AUDIO).QXP
9/5/2016
4:29 PM Page 129
Features of your vehicle
Steering wheel remote control
Dual Steering Wheel Remote Control*
Tuner
Short press: Preset up/Preset Down
Long Press: Fast Seek Up/Fast Seek Down
CD/iPod/USB
Short press: Next Track/Previous Track
Long Press: Fast Forward/Fast Backward
BT
Press to answer an incoming phone call
BT
Press to reject an incoming phone call or terminate an
ongoing phone call
Press to mute the sound of the system
Short press to increase/decrease the volume by
step
Long press to increase the volume continuously as long
as the key is pressed
Head Unit
If the Head Unit is off, short press to switch on the Head
Unit.
If the Head Unit is on, long press to switch off the Head
Unit.
Tuner
If the Head Unit is on, short press to select the next avail-
able source (wraparound): FM (last selected band) -> AM
(last selected band) -> CDP -> AUX -> USB/IPOD -> BTA
4 129
YN ENG 4(104~AUDIO).QXP
9/5/2016
4:29 PM Page 130
Features of your vehicle
Single Steering Wheel Remote Control*
Tuner
Short press: Preset up/Preset Down
Long Press: Fast Seek Up/Fast Seek Down
CD/iPod/USB
Short press: Next Track/Previous Track
Long Press: Fast Forward/Fast Backward
Short press to increase/decrease the volume by
1 step
Long press to increase the volume continuously as long
as the key is pressed
Head Unit
If the Head Unit is off, short press to switch on the Head
Unit.
If the Head Unit is on, long press to switch off the Head
Unit.
Tuner
If the Head Unit is on, short press to select the next avail-
able source (wraparound): FM (last selected band) -> AM
(last selected band) -> CDP -> AUX -> USB/IPOD -> BTA
Press to mute the sound of the system
Note: To enable the following functions to be controlled by the steering wheel keys,
ensure there is CD inserted and USB/iPod/AUX is connected.
* Only when the car is equipped with a Steering Wheel Remote Control
4 130
YN ENG 4(104~AUDIO).QXP
9/5/2016
4:29 PM Page 131
Features of your vehicle
The Setup menu
TA/News Volume
PTY search
With this setting you can set the volume
Searching for stations by programme
In the setup menu you can change to
used when traffic announcements are
type.
your preferred settings.
broadcasted.
Enter the this sub menu as described
Short press the SETUP button to
Enter the this sub menu as described
above.
enter the Setup menu.
above.
Press the or buttons to select
Short press the or button to
Press the or buttons to select
the desired programme type.
access the desired sub-menu.
the desired value.
Press the OK button to confirm.
To exit, press SETUP, CD, FM or AM
buttons.
Default setting: 12
PTY programme type 1 ... 29 can be
The following options are available:
Setting range: 3 ... 25
selected
On Volume
TA/News Volume
SDVC
PTY
News
Default setting: No PTY
Region
AF
Text Scrolling
Security Code Bluetooth Menu
Setting the speed-dependent volume
(SDVC)
News
On Volume
With this function the volume is automat-
Enter the this sub menu as described
In this sub-menu the On volume can be
ically changed proportionally to the car
above.
set to a certain level the unit will use
speed.
Press the or buttons to select
when switched on.
The higher the car’s speed is, the louder
Off or On.
the volume.
Enter the this sub menu as described
News On - Allows the reception of
above.
Enter the SDVC sub-menu as
News broadcast
described above.
Press the or buttons to select
News Off - Does not allow the recep-
the desired value.
Press the or buttons to select
tion of News broadcast
the pre-defined curve.
Default setting: 12
Default setting: NEWS OFF
Default setting: 1
Setting range: 3 ... 25
Setting curve range: 1 ... 5
Curve range
0: SDVC feature is
switched OFF
4 131
YN ENG 4(104~AUDIO).QXP
9/5/2016
4:29 PM Page 132
Features of your vehicle
Regionalization (REG)
Alternative Frequency (AF)
MP3 Text Scrolling
This function controls the automatic sta-
This function enables or disables the
Activating/ deactivating text display with
tion follow-me in order to keep tuned to
Alternate Frequency function. With AF
MP3 playback. The text appears in the
the same regional station, or to switch
enabled, the tuner will automatically tune
middle line of the screen.
between regional stations which might
to the alternative frequency from the AF-
Enter the “Text Scrolling” sub-menu
have different audio programs.
list of the tuned station, with the best
as described above.
Enter the REG sub-menu as
reception signal.
Press the or buttons to select
described above.
Enter the AF sub-menu as described
Text scrolling On or Off.
Press the or buttons to select
above.
The following settings are available:
REG Off, On or Auto.
Press the or buttons to select
Fixed: This allows to display one page
Regionalization Off - This setting will
AF Off or AF On.
only (with a maximum of 12 charac-
ignore the region setting.
AF on: Automatic re-tuning to alterna-
ters)
Regionalization On - This setting will
tive frequencies for the same station.
Scrolling: This allows to display two
not ignore the region setting.
AF off: No automatic re-tuning to
pages (with a maximum of 12 charac-
Regionalization Auto - The tuner will
alternative frequencies. The tuner will
ters per page, 24 characters in total).
tune to the station with the best
not leave the frequency set.
Only one page is displayed at a time,
reception condition and with the same
the pages will alternate every 5 sec-
regional characteristic. If none of the
onds.
stations satisfy the above condition,
the regional characteristic will be
ignored.
Standard setting: REG OFF
4 132
YN ENG 4(104~AUDIO).QXP
9/5/2016
4:29 PM Page 133
Features of your vehicle
Security Code
Enabling the Security Code option
The unit is equipped with a security code
Short press the SETUP button to
WARNING
option. This code can be used to protect
enter the SETUP menu.
If security code function is activat-
the Head Unit against theft. In case the
Short press the or button to
ed and battery was disconnected,
Head Unit is being disconnected from the
access the Security Code mode.
audio set will ask for the Security
car’s power supply and the security code
code. Be careful and remember the
✎ Now you have to enter the current
option being active you will be prompted
security code.
password that you have changed.
to enter the four digit security code.
1. Short press the
or
button to
Any code except 0000 enables the
set the value for each digit of the cur-
security code feature.
rent security code.
Code 0000 disables the security code
2. Short press the or button to
feature.
select a specific digit.
Behavior of security code function
3. Short press the OK button to con-
Security Code will be prompted if
firm the security code.
security code function is enabled and
Upon correct entry of the security
battery is disconnected.
code, you will be asked to enter the
radio functions are deactivated dur-
new security code that will replace the
ing the Security Code Prompt
previous code memorized in the Head
User is given 2 attempts to enter the
Unit.
correct security code.
Repeat the steps 1., 2. and 3. to enter
Upon correct entry of the security
the new code.
code, all the radio functions will be
To abort the Security Code Menu in
activated.
Setup mode, press either one of the
Upon 2 attempts of incorrect entry of
following buttons:
,
, FM, AM,
the security code, radio will enter the
CD, AUX, MUTE, TA, 1 through 6,
LOCKED state.
AST, SCAN, INFO, SETUP, SOUND
Once in LOCKED state, radio will only
or
prompt for security code after 1 hour.
4 133
YN ENG 4(104~AUDIO).QXP
9/5/2016
4:29 PM Page 134
Features of your vehicle
Troubleshooting
Status
Explanation / How to check
By switching the AM button, 2 dif-
In rare instances, your Head Unit may not be functioning the way you
ferent memory banks (MW, MWA)
expect it to do. Before calling the service department, please read the
operating instructions thoroughly and go through the following check
are able to store 6 different sta-
list; it may be possible to quickly solve the problem malfunction.
tions each.
Increasing / decreasing volume
Check SDVC setting (1-5 / off) in
General
Setup menu.
Status
Explanation / How to check
Bad or no reception of the broad-
Check if the antenna is correctly
The operating panel generates
No error. The unit feels warm.
cast signal
connected.
some heat.
Check whether the supply volt-
The volume decreases automati-
An integrated safety circuit pre-
age‘s negative pole (brown cable)
cally. The volume can no longer
vents the temperature in the unit
is correctly connected to earth
be increased.
from exceeding a certain value.
(vehicle chassis).
Allow the unit to cool down
The frequency instead of the sta-
The unit is tuned to a station that
(set low volume).
tion name is displayed
does not transmit RDS signals or
The volume and equalizer is self-
the transmitter is too weak.
adjusted based on radio signal
The required station cannot be
The desired station is too weak.
intensity and its quality level with
tuned to using automatic search
Set desired station manually
influence of region and location.
(manual tuning)
Tuner
Check whether the antenna is
Status
Explanation / How to check
completely and correctly connect-
“PI search” on the display
When recall is preset, the PI
ed.
information is not available (due
No traffic announcements are
Activate the traffic announcement
to very weak signal) or has been
switched through (during iPod®
by pressing TA button.
changed (due to different region).
playback)
Meanwhile, check the REG set-
tings in Setup menu.
Stored radio stations disap-
By switching the FM button, 3 dif-
peared
ferent memory banks (FM1, FM2,
FMA) are able to store 6 different
stations each.
4 134
YN ENG 4(104~AUDIO).QXP
9/5/2016
4:29 PM Page 135
Features of your vehicle
CD player
Status
Explanation / How to check
USB / iPod® / AUX
Explanation / How to check
CD is rejected by the unit
The CD may be dirty. Clean the
Status
The connected USB-device is not
CD with a damp cloth.
USB device is connected and
supported by the Head Unit.
The CD does not comply with the
selected but no sound is audible
The USB device may be defective.
CD player‘s specifications. See
Distorted sound during play iPod®
Your iPod® may be defective
“Notes on audio and MP3 CDs”
is connected and selected but no
Check the functioning of your
Distorted sound/ skips during CD
Player cannot read CD. CD is
sound is audible
iPod® without being connected
play
damaged or spoiled.
the interface connector.
CD player does not work.
In cold weather conditions, con-
The Kia iPod® interface cable
densation may occur on the laser.
may be defective Have the Kia
With the set on, wait for 5 min-
iPod® interface cable checked at
utes until the condensation evap-
the Kia repair shop See “Notes
orates.
on USB and/or iPod®”
No sound during CD playback
Some CDs contain multimedia
data which is not recognized by
the unit. Advance the tracks until
Security Code
Explanation / How to check
music is heard.
Status
If the Radio is in LOCKED state,
See “Notes on audio and MP3
Radio is in LOCKED or Security
wait for 1 hour for it to enter the
CDs”
Code Prompt state
Security Code Prompt state
Problems with new copy-protect-
Some copy protection procedures
Once the Radio enters Security
ed audio CDs
are incompatible with accepted
Code Prompt state, enter the cor-
standards for audio CDs.
rect security code.
This is not a fault of the unit.
If you have forgotten the security
Bluetooth® Wireless
code, please contact your dealer.
Technology
Explanation / How to check
Status
Check if Bluetooth® Wireless
Technology device is stored in the
Bluetooth® Wireless Technology
Head unit.
device is not able to connect to
Check if “Kia BLUETOOTH” is
the Head unit
stored in the Bluetooth® Wireless
Technology device Redo Pairing
4
135
YN ENG 4(104~AUDIO).QXP
9/5/2016
4:29 PM Page 136
Features of your vehicle
Abbreviations
A2DP
Advanced Audio Distribution Profile
AF
Alternate Frequency
AST
Auto-Store
AVRCP
Audio/Video Remote Control Profile
BT
Bluetooth
BTA
Bluetooth Audio
CA
Compressed Audio
CDP
CD Player
EON
Enhanced Other Networks information
FF
Fast Forward
FR
Fast Reverse or Fast Backward
HFP
Hands-Free Profile
PS
Program Service Name
PTY
Program Type
RDS
Radio Data System
RND
Random
RPT
Repeat
TP
Traffic Program Identification
TA
Traffic Announcement
4 136
YN ENG 5.QXP
9/5/2016
4:31 PM Page 1
Before driving / 5-3
Key positions / 5-4
Engine start/stop button / 5-8
ISG(idle stop and go) system / 5-14
Manual transaxle / 5-17
Automatic transaxle / 5-20
Brake system / 5-26
Cruise control system / 5-37
Speed limit control system / 5-41
Economical operation / 5-43
Special driving conditions / 5-45
Winter driving / 5-50
Driving your vehicle
5
Trailer towing / 5-54
Vehicle weight / 5-62
YN ENG 5.QXP
9/5/2016
4:31 PM Page 2
Driving your vehicle
WARNING - ENGINE EXHAUST CAN BE DANGEROUS!
Engine exhaust fumes can be extremely dangerous. If, at any time, you smell exhaust fumes inside the vehicle, open the win-
dows immediately.
• Do not inhale exhaust fumes.
Exhaust fumes contain carbon monoxide, a colorless, odorless gas that can cause unconsciousness and death by asphyxia-
tion.
• Be sure the exhaust system does not leak.
The exhaust system should be checked whenever the vehicle is raised to change the oil or for any other purpose. If you hear
a change in the sound of the exhaust or if you drive over something that strikes the underneath side of the car, we recommend
that the system be checked by an authorized Kia dealer.
• Do not run the engine in an enclosed area.
Letting the engine idle in your garage, even with the garage door open, is a hazardous practice. Never run the engine in your
garage any longer than it takes to start the engine and back the vehicle out.
• Avoid idling the engine for prolonged periods with people inside the vehicle.
If it is necessary to idle the engine for a prolonged period with people inside the vehicle, be sure to do so only in an open area
with the air intake set at "Fresh" and fan operating at one of the higher speeds so fresh air is drawn into the interior.
If you must drive with the tailgate open because you are carrying objects that make this necessary:
1. Close all windows.
2. Open side vents.
3. Set the air intake control at "Fresh", the air flow control at "Floor" or "Face" and the fan at one of the higher speeds.
To assure proper operation of the ventilation system, be sure the ventilation air intakes located just in front of the windshield are
kept clear of snow, ice, leaves or other obstructions.
5 2
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст