Geely FC. Manual part — 42
Geely FC. Manual part - 42
Firstly, loosen the connecting bolt of cover, and take out cover and stop disc spring of output shaft
bearing, secondly, put special wrench whose surface has four cylindrical column heaves in four holes
of support cover of rear shaft of output shaft and screw it out; lastly, loosen fastening bolt of shift cover,
take out shift cover assembly, and loosen connecting bolt of transmission to take out transmission
shell.
Transmission—Disassemble assembly
Transmission
Disassemble assembly
165
Connecting bolt of cover
Cover
Fastening bolt of shift cover
Stop disc spring of output shaft bearing
Support cover of rear shaft of output shaft
Connecting bolt
Transmission—Disassemble assembly
Take out interlocking pin with magnetic stick
Take out clip spring of fork shaft, liking that shown in figure.
Clamp the upside of fork shaft which is protected by some
cloths and take it out, liking that shown in figure.
Take out reverse gear and reverse gear shaft
Disassemble two bolts and swing arm bracket of reverse gear,
liking that shown in figure.
166
Transmission—Disassemble assembly
Disassemble interlocking pin with magnetic stick and take out
fork shaft and fork.
Disassemble bolt and fork shaft liking that shown in figure.
Disassemble clip spring liking that shown in figure.
Take out fork by disassembling clip spring.
167
Disassemble lubricating oil pipe.
Take our bushing liking that shown in figure.
Take our oil seal.
Take our exterior ring of tapered shaft with special tool liking
that shown in figure.
Disassemble oil guide cover.
Transmission—Disassemble assembly
168
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст