Geely CK (2008). Manual part — 55
Geely CK (2008). Manual part - 55
217
Section 5 Rear Combination Lamp Replacement
I. REMOVAL
1. Remove rear trunk seal strip and interior trimming.
2. Remove the 3 mounting bolts (A, B, C as shown in the illustration).
3. Remove the rear combination lamp electrical connector.
4. Pull the rear combination lamp assembly backwards.
Seal Strip
Interior Trimming
Buckle and Plug
A
B
C
Electrical
Connecto
r
218
II. INSTALLATION
1. Install the rear combination lamp and then the 3 mounting bolts.
2. Install the electrical connector.
3. Install the rear trunk interior trim.
4. Install the seal strip.
III. REAR COMBINATION LAMP BULB REPLACEMENT
1. Remove the O-ring seal.
2. Turn the lamp-holder counter-clockwise. Pull out the lamp-holder.
3. Remove the bulb and replace the bulb.
Section 6 High Mounted Stop Lamp Replacement
z
Remove the High mounted stop lamp in direction 1 and 2. (as shown above in the illustration)
z
Disconnect the connector.
Partition
High Mounted
Stop Lamp
219
Section 7 Interior Dome Lamp Replacement
1. Gently Pry the lamp shield off at the point a with a screwdriver.
2. Remove the 2 mounting bolts with a screwdriver (take care not to touch the bulb).
3. Pull the High mounted stop lamp assembly downwards.
4. Pull out the electrical connector.
Roof Panel Interior Trim
Lamp Body
Lamp Shield
a
Fixing Screw
220
Roof Panel Interior
Trim
Rear Reading Lamp
(original status)
Section 8 Rear Row Reading Lamp Replacement
1. Gently pry the rear row reading lamp off at the point a with a screwdriver (Position 1 as shown in the
illustration).
2. Pull out the rear reading lamp downwards with an angle (Position 2 as shown in the illustration)
3. Remove the electrical connector.
Section 9 License Plate Lamp Replacement
1. Remove the license plate lamp with a screwdriver.
2. Remove the electrical connector.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст