Geely Emgrand X7. Manual part — 670
Geely Emgrand X7. Manual part - 670
12.6.4.3 Front suspension longitudinal beam replacement
Dismantlement Procedure
1. For lifting of the vehicle, refer to
1.3 Lifting of
Vehicle.
2. Fixing bolt on the front of front vertical beam.
NL12-0071b
3. Dismantle fixing bolt at the rear end of front
vertical beam.
4. Remove the front longeron.
NL12-0072b
Installation Procedure:
1. Install front suspension longitudinal beam.
2. Install fixing bolt on the front of front suspension
vertical beam, but do not tighten too much.
NL12-0071b
2679
3. Install fixing bolt on the rear end of vertical beam
of front suspension.
Torque : 85Nm(Metric)34lb-ft (English system)
4. Tighten the front fixing bolts for the front
suspension longeron.
Torque : 85Nm(Metric)34lb-ft (English system)
5. Lower
the
vehicle.
NL12-0072b
2680
12.6.4.4 Front subframe replacement
Dismantlement Procedure
1. Align steering disc and lock it.
2. For dismantling of left, right front wheel, refer to
4.4.5.1 Replacement of wheels
.
3. For lifting of the vehicle, refer to
1.3 Lifting of
Vehicle.
4. Dismantle horizontal pin bolt between steering
gear and steering pipe column universal joint.
NL12-0073b
5. Remove the connecting bolt between the power
steering pump and the high pressure oil pipe.
NL12-0074b
6. Remove the steering gear oil return pipe fixing
clamp.
NL12-0075b
2681
7. Remove the through bolt between the engine rear
soundproof pad and front subframe.
NL12-0076b
8. Extract the cotter pins of the fixing bolts for the
tie rods on both sides and remove the fixing bolts.
NL12-0077b
9. Remove the connecting nut between the
connecting rod between the stabilizer bars on
both sides and front shock absorber.
NL12-0078b
2682
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст