Geely Emgrand X7. Manual part — 671
Geely Emgrand X7. Manual part - 671
10. Dismantle lower fixing bolt and nut of lower
swing arm ball head on both sides.
NL12-0080b
11. Use flat plate jack to support sub frame.
NL12-0081b
12. Dismantle fixing bolt of reinforcement plate3 of
subframe of both side.
NL12-0079b
2683
13. Dismantle front auxiliary frame on both sides and
vehicle connecting bolt.
14. Slowly lower jack and remove front auxiliary
frame.
15. For dismantling of steering gear from front
auxiliary frame, refer to
7.2.8.13 Replacement of
power steering gear with tie rod assembly.
16. For dismantling of front stabilizer rod from front
auxiliary frame, refer to
4.2.7.5 Replacement of
stabilizer rod.
NL12-0082b
Installation Procedure:
1. Install front stabilizer rod on front auxiliary
frame.
2. Install steering wheel onto front auxiliary frame.
3. Use pallet jack to slowly lift front auxiliary
frame.
4. Install and tighten connecting bolt between front
auxiliary frame on both sides and vehicle body.
NL12-0082b
Torque: 145 Nm (Metric) 107.3 lb-ft (English system)
5. Install and tighten the front subframe reinforcing
plate fixing bolt.
Torque: 145 Nm (Metric) 107.3 lb-ft (English system)
NL12-0081b
2684
6. Install and tighten the fixing bolt and nut on the
bottom of the both side lower swing arm ball
ends.
Torque :135Nm(Metric)100lb-ft(English system)
NL12-0079b
7. Remove the connecting nut between the
connecting rod between the stabilizer bars on
both sides and front shock absorber.
Torque: 74 Nm (Metric) 54.8 lb-ft (English system)
NL12-0078b
8. Install and tighten the fixing bolt between both
side tie rod external ball ends and steering joint.
Torque: 33 Nm (Metric) 24.4 lb-ft (English system)
9. Install both sides tie rod outer ball head and
knuckle fixing nut split pin .
NL12-0077b
2685
10. Install and tighten through bolt between engine
rear vibration insulation pad and auxiliary frame.
Torque: 55 Nm (Metric) 40.7 lb-ft (English system)
NL12-0083b
11. Connect steering gear oil pipe and install fixing
snap ring.
NL12-0075b
12. Install and tighten high pressure oil pipe fixing
bolt of power steering pump.
Torque: 25Nm (Metric) 18. 5lb-ft(English system)
NL12-0074b
2686
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст