Geely Emgrand X7. Manual part — 302
Geely Emgrand X7. Manual part - 302
7. Install sliding sleeve locking pin.
FE03-0045b
8. Install outer snap spring.
9. Install shift control mechanism assembly.Refer
to“3.4.8.4 shift control mechanism replacement”.
FE03-0046b
1207
3.4.8.6 fork shaft replacement
Dismantle procedure
1. Refer to 3.4.8.3 "Replacement of transmission
Assembly" to dismantle the transmission
assembly.
2. Dismantle shift control mechanism assembly,
Refer to“3.4.8.4shift control mechanism
assembly replacement.
3. Dismantle location bolt of reverse gear.
FE03-0047b
4. Dismantle outer connecting bolt of transmission
end-cover
FE03-0048b
5. Dismantle inner connecting bolt of transmission
end cover.
FE03-0049b
1208
6. Take out rear end cover.
FE03-0050b
7
Dismantle coupling rod of reverse fork
Note
:
Pull out one-end (2)of return spring beforce
dismantle fixing bolt
(
1
)
.
1
1
2
FE03-0051b
8. Dismantle 1st and 2
nd
speed fork fixing bolt.
FE03-0052b
1209
9. Dismantle lock ping on the 2nd speed fork shaft.
Notes :It must used special tool,otherwise,make lock
pin swell so as not to pull out
!
FE03-0053b
10 After clockwise rotated 180degress,Pull up
1st-speed fork shaft Notes 5th speed and
self-lock pin of reverse fork
Notes :fork shaft is good match with fork, it is
prohibit to used fork forward both side by free force
to cause unusge fork changed bending and
deformantion during dismantle process
FE03-0054b
11. Take out snap spring under the 5th speed and
reverse fork shaft by snap ring pliers
FE03-0055b
1210
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст