Geely Emgrand X7. Manual part — 470
Geely Emgrand X7. Manual part - 470
3. Connect front row seat safety belt retractor wire
harness connector.
4. Upper and lower install panels of B pillar
NL09-0052b
5. Install and tighten the fixing bolt for the bottom
clamping plate on the center pillar.
6. Connect the battery negative cable.
NL09-0053b
1879
9.3.7.8 Replacement of Second-row Side Seat Belt Retractor
Dismantlement Procedure
1. Dismantle fixing bolt of middle row seat safety
belt lower fixing plate.
2. For dismantling of rear column lower trimming
plate, refer to 12.9.1.5 Replacement of rear
column lower trimming plate.
3. For dismantlement of the rear pillar top trim
panel, see 12.9.1.6 Replacement of Rear Pillar
Top Trim Panel.
NL09-0054b
4. Dismantle fixing bolt of upper fixing plate of
middle row seat safety belt.
NL09-0055b
5. Remove the fixing bolt for the side belt retractor
on the middle seat.
NL09-0056b
1880
Installation Procedure:
1. Install and tighten middle row right side safety
belt retractor fixing bolt.
Torque: 9Nm (Metric) 6. 7lb-ft (English system)
NL09-0058b
2. Install and tighten fixing bolt of upper fixing plate of
safety belt on middle row seat side.
Torque: 45Nm (Metric) 33. 3lb-ft (English system)
3. Install the rear column upper trim panel.
4. Install the rear column lower trim panel.
NL09-0057b
5. Install and tighten the fixing bolt for the bottom
clamping plate for the intermediate seat belt.
Torque: 45Nm (Metric) 33. 3lb-ft (English system)
NL09-0059b
1881
9.3.7.9 Replacement of Second-row Middle Seat Belt Retractor
Dismantlement Procedure
Warning: Refer to "Warning on Battery
Disconnection" in "Warnings and Precautions".
1. Disconnect the battery negative cable. Refer to
2.11.8.1 Battery Cable Disconnection/Connection
Procedures.
2. For dismantling of vehicle top inner trimming
plate, refer to 12.9.1.11 Replacement of top cover
inner trimming plate.
3. Dismantle fixing bolt of middle safety belt
retractor of middle row seat.
NL09-0060b
Installation Procedure:
1. Install and tighten middle row seat middle safety
belt retractor fixing bolt.
Torque: 45Nm (Metric) 33. 3lb-ft (English system)
2. Install the roof panel.
3. Connect the battery negative cable.
NL09-0061b
1882
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст