Geely Emgrand X7. Manual part — 532
Geely Emgrand X7. Manual part - 532
Installation procedure:
1. Install
bulb
1.
2. Connect front read lamp wire
harness connector 2.
1
2
NL11-0240b
3. Install the dome lamp and tighten
the fixing screws.
Notes:
"Cautions of fasteners" shown in
"warning and cautions".
Torque: 3Nm (Metric system) 2.2lb-ft
(English system)
4. Connect the battery negative
cable.
NL11-0237b
2127
Replacement of rear ceiling lamp and reading lamp
Dismantlement procedure
Warning!
Warning: refer to “warning on battery
disconnection” in “warnings and
precautions”.
1. Disconnect the battery negative
cable. Refer to 2.11.8.1 battery
cable disconnection/connection
procedures.
2. Insert special tool into rear dome
lamp shield rim groove, and
dismantle lamp shield
NL11-0241b
3. Dismantle fixing screw of rear
read lamp.
NL11-0242b
4. Disconnect rear dome lamp wire
harness connector.
5. Remove the rear reading lamp.
NL11-0243b
2128
Installation procedure:
1. Connect to rear ceiling lamp
harness connector.
NL11-0244b
2. Install rear read lam and tighten
fixing screw.
Notes:
"Cautions of fasteners" shown in
"warning and cautions".
Torque: 2Nm (Metric system) 1.5lb-ft
(English system)
3. Press indoor door control lamp
shield into the housing.
4. Connect the battery negative
cable.
NL11-0242b
2129
11.4.8.3 Trunk lamp replacement
Dismantlement procedure
Warning!
Warning: refer to “warning on battery
disconnection” in “warnings and
precautions”.
1. Disconnect the battery negative
cable. Refer to 2.11.8.1 battery
cable disconnection/connection
procedures.
2. Use suitable tool to dismantle
boot lamp from inner trimming
plate.
NL11-0245b
3. Disconnect trunk lamp harness
connector.
NL11-0246b
Installation procedure:
1. Connect to trunk lamp harness
connector.
NL11-0247b
2130
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст