Geely Emgrand X7. Manual part — 533
Geely Emgrand X7. Manual part - 533
2. Install boot lamp.
NL11-0248b
2131
11.3.8.4 Replacement of front fog lamp
Dismantlement procedure
Warning!
Warning: refer to warning on battery
disconnection in warnings and
precautions.
1. Disconnect the battery negative
cable. Refer to 2.11.8.1 battery
cable disconnection/connection
procedures.
NL11-0249b
2. For dismantling of lower
protective plate of engine, refer to
12.10.1.8 left and right protective
plate at the bottom of engine.
Replacement
3. Disconnect the fog lamp
assembly harness connector.
NL11-0250b
4. Remove the fixing bolts of fog
lamp.
5. Remove the fog lamp assembly.
6. Loosen and remove the bulb from
the fog lamp assembly.
NL11-0251b
2132
Installation procedure:
1. Insert the replaced bulb and
tighten the fog lamp assembly.
Notes:
Avoid contacting the bulb or having it
get in contact with any wet item.
When the lamp is turned on, the grease
or moisture on the bulb may cause the
bulb explode. If the bulb contacts with
grease or moisture, clean the bulb with
alcohol or an appropriate cleaning
agent and dry the bulb.
2. Tighten fog lamp bolt.
Torque:5.5Nm(Metric) 4lb-ft(English
system)
3. Connect the fog lamp assembly
harness connector.
4. Install the engine bottom guard
plate.
5. Connect the battery negative
cable.
NL11-0251b
2133
11.4.8.5 Replacement of rear fog lamp
Dismantlement procedure
Warning!
Warning: refer to warning on battery disconnection in warnings and precautions.
1. Disconnect the battery negative
electrode cable. Refer to 2.11.8.1
Battery Disconnection.
2. Dismantle the rear bumper. Refer
to 12.4.3.3 Replacement of Rear
Bumper.
3. Disconnect the rear fog lamp
harness connector
NL11-0252b
4. Dismantle screw used for fixing
of rear fog lamp.
5. Screw out the bulb.
NL11-0253b
Installation procedure:
1. Install and tighten rear fog lamp
fixing screw.
Notes:
Avoid contacting the bulb or having it
get in contact with any wet item.
When the lamp is turned on, the skin
grease or moisture on the bulb may
cause the lamp
Bulb explodes. If the bulb contacts
with grease or moisture, clean the bulb
with alcohol or an appropriate
cleaning agent and dry the bulb.
NL11-0254b
2134
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст